2012 Mercedes-benz Vito

Front Windscreen washer not working (3.5 (a))

Horn not working (7.7 (a))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Coolant leak ()

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Horn not working (7.7 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brake pipe excessively corroded (1.1.11 (c))

Windscreen washer not working (3.5 (a))

Coolant leak ()

Exhaust mounting defective (6.1.2 (a))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Fuel tank slightly loose (6.1.3 (a) (i))

Brake pipe corroded, covered in grease or other material both rear (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Brake pipe corroded, covered in grease or other material both rear (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust mounting defective (6.1.2 (a))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust mounting defective (6.1.2 (a))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust clamp missing

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)