2004 Fiat Panda

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

parking brake effort low for this car

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

parking brake effort low for this car

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Oil leak ()

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Oil leak ()

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Tyre worn close to the legal limit worn on edge (4.1.E.1)

Nearside Rear exhaust outer casing coming adrift

Offside Front Tyre worn close to the legal limit worn on inner edge (4.1.E.1)

Oil leak ()

Central Exhaust system not adequately supported (7.1.1)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Tyre worn close to the legal limit worn on edge (4.1.E.1)

Nearside Rear exhaust outer casing coming adrift

Offside Front Tyre worn close to the legal limit worn on inner edge (4.1.E.1)

Oil leak ()

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)