MOT Status
ExpiredMileage
202,085 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Lower Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security under air filter (6.2.2 (d) (i))
Offside Front Upper Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Nearside Front Upper Shock absorbers insecurely attached (5.3.2 (a) (i))
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting between wheels (6.2.2 (d) (i))
Nearside Rear Vehicle structure is deformed and structural rigidity is significantly reduced between wheels (6.1.1 (a) (i))
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting in front of tank (6.2.2 (d) (i))
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting behind rear wheel (6.2.2 (d) (i))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Lower Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security under air filter (6.2.2 (d) (i))
Offside Front Upper Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))
Offside Front Windscreen wiper blade defective (3.4 (b) (i))
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Rear Brake hose slightly twisted (1.1.12 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Inner Tyre has a bulge, caused by separation or partial failure of its structure side wall (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Suspension component mounting prescribed area fractured to the extent that control of the vehicle is likely to be adversely affected shocker bracket corroded (5.3.6 (a) (ii)) DANGEROUS
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Rear Brake hose slightly twisted (1.1.12 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced body mount (6.1.1 (c) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner wheel arch (6.1.1 (c) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced body mount (6.1.1 (c) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner wheel arch (6.1.1 (c) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Horn not working (7.7 (a))
Nearside Front Headlamp aim too far to the right (4.1.2 (a))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Headlamp levelling device inoperative (4.1.5 (a))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Valve stem seriously damaged perished (5.2.3 (j)) DANGEROUS
Nearside Rear Valve stem seriously damaged perished (5.2.3 (j)) DANGEROUS
Offside Front Valve stem seriously damaged perished (5.2.3 (j)) DANGEROUS
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced body mount (6.1.1 (c) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner wheel arch (6.1.1 (c) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced body mount (6.1.1 (c) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))
Exhaust has a minor leak of exhaust gases front pipe clamp loose (7.1.2)
Brake load sensing valve linkage defective and function impaired (3.6.E.3)
Nearside Headlamp aim too low (1.8)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp aim too low (1.8)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear fog lamp not working (1.3.2b)
Offside Registration plate lamp not working (1.1.C.1d)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Service brake: efficiency below requirements (3.7.B.7)
rear brake application uneven (3.7.B.2)
Exhaust has a minor leak of exhaust gases front pipe clamp loose (7.1.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Parking brake: efficiency below requirements (3.7.B.7)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
brake wear lamp on
oil loss at nearside rear hub
Battery insecure (1.9.1)
Brake load sensing valve linkage defective and function impaired (3.6.E.3)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Rear rear brake recording little or no effort (3.7.B.5a)
Service brake: efficiency below requirements (3.7.B.7)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
rear both sides oil loss at rear hubs
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
rear both sides oil loss at rear hubs
Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush (2.4.B.2)
Offside Rear Leaf spring has excessive wear in a shackle pin and/or bush (2.4.B.2)
Offside Seat belt retracting mechanism defective (5.2.5b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Side repeater incorrect colour (1.4.A.2f)
Nearside front brake binding (3.7.B.1)
Offside Front Direction indicator incorrect colour (1.4.A.2f)
Offside Headlamp aim too low (1.8)
Offside Side repeater incorrect colour (1.4.A.2f)
Offside rear brake recording little or no effort (3.7.B.5a)
Parking brake: efficiency below requirements (3.7.B.7)
front brake application uneven (3.7.B.2)
rear brake application uneven (3.7.B.2)
All rear anti roll bar bushes worn
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
How Reliable is the Iveco Daily?
Based on 817,098 MOT tests across 76,231 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YK55 CTY is a 2006 Iveco Daily in White with a 2,300cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 54.5%.
Across all 2006 Iveco Daily models, the average MOT pass rate is 64.8% with a typical mileage of 112,091 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Iveco Daily fails its MOT is parking brake: efficiency below requirements, accounting for 54,319 recorded failures. If you're considering buying YK55 CTY, it's worth having these areas checked by a mechanic before committing.
The Iveco Daily typically stays on UK roads for around 30 years. At 20 years old, this Iveco Daily is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of YK55 CTY?
You can check the full history of YK55 CTY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YK55 CTY registered?
YK55 CTY is a 2006 Iveco Daily, first registered on 27 February 2006.
Is YK55 CTY safe to buy?
The MOT history for YK55 CTY shows 22 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YK55 CTY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YK55 CTY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.