2007 Iveco Daily 35S12 LWB

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inside wheel arch (5.3.6 (a) (i))

Nearside Outline marker lamp not working all marker (4.2.1 (a) (ii))

Offside Rear Outline marker lamp missing side marker (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inside wheel arch (5.3.6 (a) (i))

Windscreen washer not working (3.5 (a))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch, near upper arm/shock. (5.3.6 (a) (i))

Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Outline marker lamp not working (4.2.1 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near shock. (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of wheel arch. (5.3.6 (a) (i))

Offside All outline marker lamps not working (4.2.1 (a) (ii))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of rear spring. (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch. (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear of wheel arch. (5.3.6 (a) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps both. (4.7.1 (b) (ii))

Nearside Front Passenger seat(s) missing at time of test ()

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

severe under body corrosion.

knock from steering column area

reserve travel of service brake could be better

slight imbalance of rear brakes

some corrosion under vehicle

Nearside Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Upper Suspension arm ball joint excessively worn swivel (5.3.4 (a) (i))

Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii))

knock from steering column area

reserve travel of service brake could be better

slight imbalance of rear brakes

some corrosion under vehicle

1 bolt per wheel could be better

Nearside Rear inner wing badly corroded

Offside Rear indicator faded

brake back plates corroded

engine area oily underneath

floorpans and inner/outer sills corroded

front fog lamps inoperative

reserve travel of service brake could be better

Driver's view of the road through the swept area of the windscreen materially affected by an obstruction (3.1 (a) (ii))

Emissions not tested exhaust broken (8.2.2.2 (e))

Exhaust has a major leak of exhaust gases broken (6.1.2 (a))

Nearside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Outline marker lamp not working (4.2.1 (a) (ii))

Offside Front Lower Suspension arm ball joint excessively worn swivel (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber lower mounting (5.3.6 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

1 bolt per wheel could be better

Nearside Rear inner wing badly corroded

Offside Rear indicator faded

brake back plates corroded

engine area oily underneath

floorpans and inner/outer sills corroded

front fog lamps inoperative

front suspension wishbones generally corroded

reserve travel of service brake could be better

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Exhaust has a major leak of exhaust gases flexi torn (6.1.2 (a))

Nearside Front Brake pipe excessively corroded swollen (1.1.11 (c))

Nearside Front Side repeater not working (4.4.1 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Offside Front Body mounting fixings insecure 30 cm of body mounting rotten (6.2.2 (c) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Exhaust mounting defective (6.1.2 (a))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Wheel bolt(s) missing (4.2.A.1e)

Offside Front front brake binding (3.7.B.1)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Exhaust has a minor leak of exhaust gases egr valve (7.1.2)

Vehicle structure has slight corrosion (6.1.B.2)

Hazard warning switch faulty (1.4.B.1d)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Bonnet retaining device ineffective (8.4.2)

Brake pedal spongy (3.3.B.1b)

Brakes imbalanced across an axle (3.7.B.5b)

Horn not working (1.6.2a)

Nearside Rear rear brake binding (3.7.B.1)

Nearside front side marker lamp not working

Exhaust tailpipe pointing to vents in bodywork.

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside inner sill area has slight corrosion, near exhaust outlet.

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Exhaust tailpipe pointing to vents in bodywork.

Nearside Front suspension has slight play in a upper suspension ball joint (2.5.B.1a)

Offside inner sill area has slight corrosion, near exhaust outlet.