MOT Status
ExpiredMileage
175,677 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
slight lift in n/s lower ball joint
Nearside Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
slight lift in n/s lower ball joint
Nearside Rear Suspension unit damaged but not to excess (5.3.5 (b) (i))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Rear Inner Road wheel slightly distorted (5.2.2 (c) (i))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Nearside Rear Suspension unit damaged but not to excess (5.3.5 (b) (i))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Rear Inner Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Body component likely to become detached Door (6.2.1 (a) (ii)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Coolant leak ()
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear tyre sidewall damage
Offside Rear tyre sidewall damage
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Suspension system inoperative (5.3.5 (a)) DANGEROUS
Suspension unit modified so that its function is seriously affected (5.3.5 (b) (ii)) DANGEROUS
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Bonded suspension unit deteriorated but can function as intended (2.4.F.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
registration plate deteriorated but not likely to be misread (6.3.1d)
registration plate faded but not likely to be misread (6.3.1d)
Nearside Front Lower Ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Front registration plate character(s) incorrectly spaced (6.3.4a)
Nearside Front Lower Ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear registration plate character(s) incorrectly spaced (6.3.4a)
Front registration plate deteriorated (6.3.1d)
Rear registration plate deteriorated (6.3.1d)
n/s rear tyre wearing on inner edge
o/s rear suspension unit gaiter split
How Reliable is the Audi Q7?
Based on 556,904 MOT tests across 56,360 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YK56 CNC is a 2006 Audi Q7 in Black with a 2,967cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 66.7%.
Across all 2006 Audi Q7 models, the average MOT pass rate is 81.5% with a typical mileage of 96,062 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Audi Q7 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 6,208 recorded failures. If you're considering buying YK56 CNC, it's worth having these areas checked by a mechanic before committing.
The Audi Q7 typically stays on UK roads for around 20 years. At 20 years old, this Audi Q7 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YK56 CNC?
You can check the full history of YK56 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YK56 CNC registered?
YK56 CNC is a 2006 Audi Q7, first registered on 28 September 2006.
Is YK56 CNC safe to buy?
The MOT history for YK56 CNC shows 21 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YK56 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YK56 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.