MOT Status
ValidMileage
132,096 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Underseal applied to vehicle underbody
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Headlamp lens slightly defective (4.1.1 (b) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Headlamp lens slightly defective (4.1.1 (b) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Road wheel fixing missing (5.2.1 (a) (i))
All previous corroded areas repaired and covered in thick black sealant
Front Anti-roll bar linkage ball joint has slight play both sides (5.3.4 (a) (i))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Play in steering rack inner joint(s)
tested in wet conditions
Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor corroded (6.2.2 (d) (i))
Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Rear Outer Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Front Anti-roll bar linkage ball joint has slight play both sides (5.3.4 (a) (i))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Suspension arm ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Play in steering rack inner joint(s)
tested in wet conditions
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake pipe corroded, covered in grease or other material and rear (1.1.11 (c))
Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Play in steering rack inner joint(s)
under body corroded front and rear
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Coil spring corroded all (5.3.1 (b) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
under body corroded
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Emissions not tested (8.2.1.2 (d))
Nearside Rear Parking (secondary brake) on a single line braking system grabbing severely (1.3.1 (c))
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Offside Rear Parking (secondary brake) on a single line braking system grabbing severely (1.3.1 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Front Coil spring corroded both (5.3.1 (b) (i))
Offside Rear Suspension component mounting repair covered in underseal sill covered with filler work (5.3.6 (a) (i))
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Front Coil spring corroded both (5.3.1 (b) (i))
Offside Rear Suspension component mounting repair covered in underseal sill covered with filler work (5.3.6 (a) (i))
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Front Brake pad(s) wearing thin n/s & o/s (1.1.13 (a) (ii))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement both (rear) (5.3.4 (a) (i))
Offside sill corroded
Tyre worn close to legal limit/worn on edge osf, nsf perished. (5.2.3 (e))
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Parking brake: efficiency below requirements (3.7.B.7)
n/s park brake low effort
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Headlamp aim too high (1.8)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
front brake disc corroded
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
front brake disc corroded
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YK56 OSU is a 2006 Toyota Aygo in Blue with a 998cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 68%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying YK56 OSU, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YK56 OSU?
You can check the full history of YK56 OSU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YK56 OSU registered?
YK56 OSU is a 2006 Toyota Aygo, first registered on 1 September 2006.
Is YK56 OSU safe to buy?
The MOT history for YK56 OSU shows 25 tests with a 68% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YK56 OSU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YK56 OSU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.