2003 Mercedes-benz Vito

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material By flexible hose (1.1.11 (c))

Offside Rear Nearside vehicle structure corroded within 30cm of towbar and off side

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Rear subframe mount (5.3.6 (a) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Rear subframe mount (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material By flexible hose (1.1.11 (c))

Offside Rear Nearside vehicle structure corroded within 30cm of towbar and off side

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Bumper needs securing

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

o/s floor to sill corroding

Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Offside Front coil spring broken (2.4.C.1a) DANGEROUS

o/s floor to sill corroding

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Vehicle structure has slight corrosion (6.1.A.1)

Engine covers fitted obscuring some components in the engine bay

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

UNDER BODY SLIGHTLY CORRODED

Under-trays fitted obscuring some underside components

side skirt fitted

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

exhaust corroded

nearside front tyre perished

offside outer sill badly corroded

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

rear discs corroded

Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Road wheel badly damaged (4.2.A.1a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside front brake application uneven (3.7.B.2)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)