MOT Status
ExpiredMileage
195,571 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Exhaust mounting defective (6.1.2 (a))
Headlamp lens slightly defective both headlamps slightly deteriorated. (4.1.1 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Undertrays fitted not allowing full inspection of underside components.
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Oil leaking excessively from engine (8.4.1 (a) (i))
Offside Rear Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Exhaust mounting defective (6.1.2 (a))
Headlamp lens slightly defective both headlamps slightly deteriorated. (4.1.1 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Undertrays fitted not allowing full inspection of underside components.
Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced SILL (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced SILL (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced SILL (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced SILL (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Headlamp aim projected beam image is obviously incorrect lens misty (4.1.2 (c))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Headlamp aim projected beam image is obviously incorrect lens misty (4.1.2 (c))
Offside Front Headlamp aim too low (4.1.2 (a))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill (6.1.1 (c) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened Heavily corroded on inner faces (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))
Outer sill fitted not allowing full inspection
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust mounting defective (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened both rear (5.3.3 (b) (i))
Nearside Rear Upper Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material corroding (1.1.11 (c))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Outer sill covers fitted so unable to check condition of sills
Rear Exhaust mounting defective (6.1.2 (a))
heavy corrosion rear subframe / suspension components
outer sill covers fitted to vehicle
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
heavy corrosion rear subframe / suspension components
only small amount of reserve travel in park brake lever
outer sill covers fitted to vehicle
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Engine covers fitted obscuring some components in the engine bay
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Under-trays fitted obscuring some underside components
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
front discs badly lipped.
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Toyota Avensis?
Based on 3,497,866 MOT tests across 274,257 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YL06 BFE is a 2006 Toyota Avensis in Grey with a 1,794cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 72.7%.
Across all 2006 Toyota Avensis models, the average MOT pass rate is 75.1% with a typical mileage of 89,184 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Avensis fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 106,316 recorded failures. If you're considering buying YL06 BFE, it's worth having these areas checked by a mechanic before committing.
The Toyota Avensis typically stays on UK roads for around 28 years. At 20 years old, this Toyota Avensis is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of YL06 BFE?
You can check the full history of YL06 BFE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YL06 BFE registered?
YL06 BFE is a 2006 Toyota Avensis, first registered on 28 July 2006.
Is YL06 BFE safe to buy?
The MOT history for YL06 BFE shows 22 tests with a 72.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YL06 BFE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YL06 BFE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.