MOT Status
ValidMileage
50,192 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Front Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))
Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Inner Play in steering rack inner joint(s) ()
Power steering component has slight seepage from a component rack (2.1.5 (a))
Rear Coil spring corroded both (5.3.1 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive axle (5.3.6 (a) (i))
Brake pedal has insufficient reserve travel spongy (1.1.2 (a))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Front Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))
Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Inner Play in steering rack inner joint(s) ()
Power steering component has slight seepage from a component rack (2.1.5 (a))
Rear Coil spring corroded both (5.3.1 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive axle (5.3.6 (a) (i))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
underside has generalised surface corrosion
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
underside has generalised surface corrosion
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Exhaust has a major leak of exhaust gases (7.1.2)
Headlamp not working on dipped beam both (1.7.5a)
Headlamp not working on main beam both (1.7.5a)
Nearside Brake pipe excessively corroded front to rear (3.6.B.2c)
Rear Exhaust system not adequately supported (7.1.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside front to rear brake pipe corrided
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on main beam (1.7.5a)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Nail in tyre ()
Nearside front to rear brake pipe corrided
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside rear brake binding (3.7.B.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Horn not working (1.6.2a)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
clutch biting high
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
clutch biting high
How Reliable is the Chevrolet Matiz?
Based on 487,981 MOT tests across 31,339 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YL08 UPO is a 2008 Chevrolet Matiz in Silver with a 796cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 60%.
Across all 2008 Chevrolet Matiz models, the average MOT pass rate is 70.7% with a typical mileage of 41,215 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Chevrolet Matiz fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 17,486 recorded failures. If you're considering buying YL08 UPO, it's worth having these areas checked by a mechanic before committing.
The Chevrolet Matiz typically stays on UK roads for around 21 years. At 18 years old, this Chevrolet Matiz is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YL08 UPO?
You can check the full history of YL08 UPO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YL08 UPO registered?
YL08 UPO is a 2008 Chevrolet Matiz, first registered on 29 July 2008.
Is YL08 UPO safe to buy?
The MOT history for YL08 UPO shows 25 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YL08 UPO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YL08 UPO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.