2007 Fiat Panda

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

paint bubbling on o/s n/s sills

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Headlamp has a product on the lens so that the light output is severely reduced both front (4.1.4 (b))

Nearside Front Service brake grabbing severely both front (1.2.1 (c))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

paint bubbling on o/s n/s sills

Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))

Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Front Service brake lagging in operation (1.2.1 (d))

Offside Front Service brake grabbing severely (1.2.1 (c))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Offside Headlamp aim too high (4.1.2 (a))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Exhaust silencer corroded.

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Exhaust silencer corroded.

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Front coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Bonded suspension unit deteriorated but can function as intended shock absorber rubber mount/bush upper (2.4.F.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear coil spring corroded (2.4.C.1b)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)