MOT Status
ExpiredMileage
103,548 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive both rear inner sills (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened both rear arms (5.3.3 (b) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Nearside Front Lower Suspension arm pin or bush excessively worn front bush (5.3.4 (a) (i))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive both rear inner sills (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened both rear arms (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced underside of vehicle throughout its entirety (6.1.1 (c) (i))
Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing (5.3.4 (a) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing (5.3.4 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Windscreen wiper blade defective both (3.4 (b) (i))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Anti-roll bar pin or bush worn but not resulting in excessive movement both sides D bushes (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone rear bush (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone rear bush (5.3.4 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Power steering pipe/hose has slight seepage (2.1.5 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened both sides at rear (5.3.3 (b) (i))
high level brake light not working
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Anti-roll bar pin or bush worn but not resulting in excessive movement both sides D bushes (5.3.4 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone rear bush (5.3.4 (a) (i))
Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone rear bush (5.3.4 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Power steering pipe/hose has slight seepage (2.1.5 (a))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Suspension arm corroded but not seriously weakened both sides at rear (5.3.3 (b) (i))
high level brake light not working
Nearside Front Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Mazda 5?
Based on 413,409 MOT tests across 26,269 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YL57 FLJ is a 2008 Mazda 5 in Grey with a 1,999cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 68.4%.
Across all 2008 Mazda 5 models, the average MOT pass rate is 69.5% with a typical mileage of 74,415 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 5 fails its MOT is shock absorber has a serious fluid leak, accounting for 13,334 recorded failures. If you're considering buying YL57 FLJ, it's worth having these areas checked by a mechanic before committing.
The Mazda 5 typically stays on UK roads for around 21 years. At 18 years old, this Mazda 5 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YL57 FLJ?
You can check the full history of YL57 FLJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YL57 FLJ registered?
YL57 FLJ is a 2008 Mazda 5, first registered on 16 January 2008.
Is YL57 FLJ safe to buy?
The MOT history for YL57 FLJ shows 19 tests with a 68.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YL57 FLJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YL57 FLJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.