2002 Mercedes-benz Ml

rear brake shoes need adjusting.

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps both lamps (4.7.1 (b) (ii))

rear brake shoes need adjusting.

Offside Front position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)

Oil leak ()

Horn not working (1.6.2a)

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Lower Anti-roll bar has excessive play in a pin/bush d-bushes (2.4.G.2)

Offside Front position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)

Oil leak ()

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Oil leak ()

Vehicle structure has slight corrosion (6.1.A.1)

engine cover fitted

n/s/r tyre is void of tread on outer edge

slight play in o/s/f trackrod

under trays fitted

Brake pipe slightly corroded (3.6.B.2c)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Under-trays fitted obscuring some underside components

damage to o/s/f headlamp bracket

Nearside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Oil leak

Centre Stop lamp not working (1.2.1b)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Steering rack gaiter split (2.2.D.2d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Parking brake lever has little reserve travel (3.1.6b)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Parking brake lever has little reserve travel (3.1.6b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Inner Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Outer Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Inner Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Outer Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)