2003 Honda CBR600FS

Offside fairing panel loose

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Position lamp not working (4.2.1 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Rear Position lamp missing (4.2.1 (a))

Rear Registration plate inscription illegible (0.1 (b))

Drive chain slightly loose (6.2.1d)

Rear Lower Rear suspension bearing has slight free play (2.4.A2a(i))

Front wheel bearings have excessive free play (2.3.5b)

Headlamp aim too high (1.6)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front wheel bearings are slightly rough (2.3.5b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

clutch lever sticking

Rear Brake pipe excessively chafed (3.2.B2a)

Front wheel bearings are slightly rough (2.3.5b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

clutch lever sticking

Rear Tyre worn close to the legal limit (4.1.3(ii))

wrong rear damper fitted altering rear ride height and steering angle

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

chain guard not fitted

rear footrests not fitted at time of test

rear of motorcycle raised affecting handling

Front Direction indicators flashing more than 120 times per minute (1.5.1c)

Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.2)

Rear Direction indicators flashing more than 120 times per minute (1.5.1c)

Rear reflector on motorcycle missing (1.4.1)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

chain guard not fitted

rear end of motorcycle raised affecting handling

rear footrests not fitted at time of test