2003 Yamaha R6

Drive chain slightly loose (6.1.7 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened scored (1.1.14 (a) (ii))

Exhaust noisy Exhaust noisy (8.1.1 (a))

Exhaust noisy Exhaust noisy (8.1.1 (a))

Rear reflector missing Rear reflector missing (4.8.2 (a) (ii))

Throttle control functioning such that safe operation of the motorcycle is adversely affected Throttle stiff and notchy and does not return (6.2.7 (a) (ii)) DANGEROUS

Exhaust noisy Exhaust noisy (8.1.1 (a))

slight play rear shock bushes

Drive chain sprocket worn to excess (6.1.7 (c) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Rear Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Drive chain slightly loose (6.2.1d)

Rear Rear suspension bearing has slight free play (2.4.A2a(i))

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Drive chain excessively loose (6.2.1d)

Nearside Rear Direction indicator missing (1.5.1a)

Offside Front Footrest missing (6.2.1a)

Offside Rear Direction indicator missing (1.5.1a)

Rear reflector on motorcycle missing (1.4.1)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain worn to excess (6.2.1e)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Roller brake test indicates a sticking brake (3.3.A1a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Rear Direction indicator not working (1.5.1c)

Offside Rear Direction indicator not working (1.5.1c)

Rear Brake fluid reservoir fluid level dangerously low (3.2.B1d)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Registration plate incorrect (6.3.1a)

Drive chain excessively loose (6.2.1d)

Nearside Front Direction indicator not working (1.5.1c)

Nearside Rear Direction indicator not working (1.5.1c)

Offside Front Direction indicator flashing more than 120 times per minute (1.5.1c)

Offside Rear Direction indicator flashing more than 120 times per minute (1.5.1c)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Registration plate with character(s) which are not the correct height (6.3.4a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)