2003 Subaru Forester

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Shocker Top Mount (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear sill and wheel arch area (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive shocker top mount (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Exhaust mounting defective and slight leak of exhaust gases (6.1.2 (a))

underside of vehicle is generally corroded

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Exhaust mounting defective (6.1.2 (a))

offside headlamp is cloudy

underside of vehicle is generally corroded

Nearside Rear brake backplate corroded

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front brake backplate corroded

Nearside Rear Brake backplate corroded

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Exhaust heat shield loose and bracket broken

Nearside Rear Brake backplate corroded

Both front brake hoses centre ferrules corroded

Front exhaust hanging bracket broken

Nearside Nearside rear shock absorber damp with fluid, offside rear light misting of oil

Nearside rear brake backpltee corroded, BORDERLINE pass and advise

Undertrays and sill covers fitted not allowing full inspection

Both front brake hoses centre ferrules corroded

Front exhaust hanging bracket broken

Nearside Headlamp aim too high Adjusted aim (1.8)

Nearside Nearside rear shock absorber damp with fluid, offside rear light misting of oil

Nearside rear brake backpltee corroded, BORDERLINE pass and advise

Offside Headlamp aim too high Adjusted aim (1.8)

Undertrays and sill covers fitted not allowing full inspection

front brake discs corroded

Exhaust system not adequately supported (7.1.1)

Nearside Front Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Brake hose excessively chafed (3.6.B.4d)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

all rear brake pipes greased at junction

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Headlamp aim too high (1.8)

Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp aim too high and too far to the left. (1.8)

Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Brake pipe slightly corroded (3.6.B.2c)

exh system in poor condition

Front pads and discs close to limit

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)