2004 Fiat Ducato

Nearside Front Brake pipe likely to become detached or damaged (1.1.11 (d) (ii))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassie (6.1.1 (c) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced suspension mounts (6.1.1 (c) (i))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassie (6.1.1 (c) (i))

Offside Front Brake pipe likely to become detached or damaged (1.1.11 (d) (ii))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bulkhead behind battery not welded and rusted (6.1.1 (c) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassie various (6.1.1 (c) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced suspension mounts (6.1.1 (c) (i))

Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cill (6.1.1 (c) (i))

Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cill (6.1.1 (c) (i))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced arch rusted (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassie (6.1.1 (c) (i))

Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out riggers (6.1.1 (c) (i))

Rear Brake load sensing valve linkage defective and function impaired (1.1.17 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced under sideof van very rusty (6.1.1 (c) (i))

Both rear inner arches corroded

Both sills corroded

Front Subframe mounting prescribed area is corroded but not considered excessive Chassis (2.4.A.3)

Oil leak ()

Rear Suspension spring mounting prescribed area is corroded but not considered excessive Both sides chassis (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside front brake binding (3.7.B.1)

Offside Front Lower Suspension component mounting prescribed area is excessively corroded rear and out rigger (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded wheel arch and upper shock mounting (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside front brake binding (3.7.B.1)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (2.4.A.3)

Offside Outer Body has slight corrosion sill (6.1.B.2)

Oil leak ()

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Front suspension has excessive play in a pin or bush of a lower wishbone inner bearing (2.5.B.1a)

Nearside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front front brake binding (3.7.B.1)

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside front brake binding (3.7.B.1)

Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Tyre worn close to the legal limit (4.1.E.1)

Brake load sensing valve linkage seized (3.6.E.3)

Brakes imbalanced across an axle (3.7.B.5b)

Direction indicators incorrect colour (1.4.A.2f)

Rear Exhaust system not adequately supported (7.1.1)

Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)

Rear Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.C.1d)

front brake application uneven (3.7.B.2)

Nearside Rear All position lamps not working (1.1.A.3b)

Nearside Rear Registration plate lamp not working (1.1.5c)

Nearside Rear Shock absorber has negligible damping effect (2.7.5)

Offside Rear Shock absorber has negligible damping effect (2.7.5)

Nearside Front front brake binding (3.7.B.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)