2003 Hyundai Getz

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords and worn on inside (5.2.3 (d) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Seat belt buckle slightly damaged (7.1.2 (d))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases front to centre pipe joint (6.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Brake pad(s) wearing thin close to limit (1.1.13 (a) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (2mm) (5.2.3 (e))

Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (2mm) (5.2.3 (e))

Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

rear wiper split

Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Front Headlamp aim projected beam image is obviously incorrect lens deteriorated & bulb in wrong (4.1.2 (c))

Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect lens deteriorated (4.1.2 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

rear wiper split

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt drop link (5.3.4 (b) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake pad(s) wearing thin (3.5.1g)

Oil leak

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

advise n\s\f tyre wearing on inner edge

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)