2005 Aprilia RS 50

Tyre worn close to the legal limit front (4.1.3(ii))

Brake lever has inadequate reserve travel (3.1.3b)

Brake pad(s) less than 1.5 mm thick front (3.2.A1f(i))

Brake pad(s) less than 1.5 mm thick rear (3.2.A1f(i))

Footrest insecure r/h/front (6.2.1a)

Footrest missing rear (6.2.1a)

Headlamp aim too high and too far to the right. (1.6)

Indicator switch insecure (1.5.4)

Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking clutch lever bracket broken (6.1.1c)

Riders seat insecure (6.2.1a)

Steering control handlebar movement restricted by cables caught on a projection wiring loose around head stock (2.1.2c)

Stop lamp affected by the operation of another lamp indicators (1.3.2)

Stop lamp does not illuminate immediately a brake applies front (1.3.1a)

Tyre worn close to the legal limit front (4.1.3(ii))

top fairing bracket twisted

Rear Drive chain slightly loose (6.2.1d)

Wheel alignment slightly misaligned. (2.5.1)

Drive chain slightly loose (6.2.1d)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Steering headbearing has excessive free play (2.2.2)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

no speedo working

Drive chain worn to excess (6.2.1e)

Front Tyre has ply or cord exposed (4.1.2a(iii)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pedal is damaged and the brake cannot be readily applied (3.1.3c)

Rear wheel bearings have excessive free play (2.4.A.2c)

Offside Rear Footrest missing (6.2.1a) DANGEROUS

Rear Drive chain sprocket slightly worn (6.2.1e)

Steering movement slightly 'notchy' (2.2.1a)

Front Direction indicator not working (1.5.1c)

Front Handlebar mounting clamp bolt loose (2.1.1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Handlebar mounting clamp bolt loose (2.1.1a)

Rear Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake pedal is bent and the brake cannot be readily applied (3.1.3c)

Rear Brake pedal is damaged and the brake cannot be readily applied (3.1.3c)

Rear Direction indicator not working (1.5.1c)

Rear Rear wheel bearings have excessive free play (2.4.A.2c)

Throttle operating incorrectly (6.2.1f)

Rear Brake disc(s) slightly scored (3.2.A1l)

low air in front tyre.

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Rear wheel bearings have excessive free play (2.4.A.2c)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)