2012 Citroen Berlingo

Items removed from driver's view prior to test ()

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Integral body structure is deformed but structural rigidity is not significantly reduced outer sill (6.1.1 (a) (i))

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Items removed from driver's view prior to test ()

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Integral body structure is deformed but structural rigidity is not significantly reduced outer sill (6.1.1 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Brake pad(s) wearing thin unable to get a clear view to measure friction material (1.1.13 (a) (ii))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Outer Integral body structure is deformed but structural rigidity is not significantly reduced sill (6.1.1 (a) (i))

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Front Brake pad(s) wearing thin unable to get a clear view to measure friction material (1.1.13 (a) (ii))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Outer Integral body structure is deformed but structural rigidity is not significantly reduced sill (6.1.1 (a) (i))

Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Front unable to clearly see condition of front brake pad linings

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Position lamp light intensity significantly reduced (4.2.3 (a) (ii))

Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Front unable to clearly see condition of front brake pad linings

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Passenger's seat backrest cannot be secured in the upright position. (6.2.6 (a) (i))

Engine coolant level slightly low

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Exhaust shield preventing heat from reaching fuel tank is missing. (Corroded)

Offside Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Vehicle passed emissions yet no print out available as too clean for analyser to detect!

Horn not working (7.7 (a))

Offside Rear Passenger's seat backrest cannot be secured in the upright position. (6.2.6 (a) (i))

Central Exhaust mounting defective Clamp (6.1.2 (a))

Exhaust shield preventing heat from reaching fuel tank is missing. (Corroded)

Nearside Front Tyre worn close to legal limit/worn on edge On limit also perished (5.2.3 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge Also perished (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge On limit also perished (5.2.3 (e))

Offside Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge Also perished (5.2.3 (e))

Rear Exhaust mounting defective (6.1.2 (a))

Vehicle passed emissions yet no print out available as too clean for analyser to detect!

Brake pedal anti slip missing, pedal surface grooved to provide grip

Central Exhaust mounting defective (6.1.2 (a))

Items removed from driver's view prior to test ()

Vehicle passed emissions yet no printout available as too clean for analyser to detect

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Brake pedal anti slip missing, pedal surface grooved to provide grip

Central Exhaust mounting defective (6.1.2 (a))

Items removed from driver's view prior to test ()

Offside Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Vehicle passed emissions yet no printout available as too clean for analyser to detect

Brake pedal rubber missing, but pedal has anti slip grooves formed acting as anti slip surface

Exhaust has a minor leak of exhaust gases Centre (6.1.2 (a))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Brake pedal anti slip rubber missing, but pedal design has grooves to provide grip in wet conditions

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Nail in tyre ()

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Vehicle has been modified for disability use

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Stop lamp not working (1.2.1b)

Offside Front coil spring broken (2.4.C.1a)

Offside Rear position lamp(s) not working (1.1.A.3b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Headlamp aim too high (1.8)

Offside Front Headlamp aim too low (1.8)

Offside Rear Rear position lamp(s) incorrect colour (1.1.A.3e)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)