2013 Znen Unknown

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Brake binding but not excessively (1.2.1 (f))

Central Front Lower NO UNDER TRAY ATTATCHED AT THE TIME OF TEST

Front Road spring worn, but not excessively (5.3.1 (b) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Road spring corroded (5.3.1 (b) (i))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Front Brake excessively binding (1.2.1 (f))

Front Road spring worn so that its cross sectional area is reduced and seriously weakened (5.3.1 (b) (i))

Horn not working (7.7 (a))

Nearside Front Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii))

Offside Rear Direction indicator missing (4.4.1 (a) (ii))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Throttle control functioning such that safe operation of the motorcycle is adversely affected Throttle & switch gear lose on handle bar (6.2.7 (a) (ii)) DANGEROUS

Headlamp aim too low (4.1.2 (a))

Steering headbearing has slight free play (2.2.2 (f) (i))

Rear Exhaust noisy (7.1.2)

Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Tyre valve stem slightly damaged (4.1.2c)

Rear Exhaust noisy (7.1.2)

Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Tyre fouling another component (4.1.4)

Rear Tyre valve stem slightly damaged (4.1.2c)

Front Steering headbearing has slight free play (2.2.2)