2004 Triumph Speed Four

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Drive chain slightly loose (6.1.7 (c) (i))

Drive chain excessively tight (6.1.7 (k) (i))

Nearside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Pillion seat with a defective supporting structure Dual seat fitted - with no rear foot rests. (6.2.6 (a) (i))

Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Rear Brake binding but not excessively (1.2.1 (f))

Stop lamp does not illuminate by the operation of both brake controls stop lamp n/w front or rear. (4.3.2 (a) (iii)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Rear Brake binding but not excessively (1.2.1 (f))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Throttle cable on the end of its adjustment.

Rear Roller brake test indicates a binding brake (3.3.A1a)

Brake disc(s) is slightly distorted slight fluctuation of front brakes (3.2.A1m)

Front Roller brake test indicates excessive fluctuation of brake effort 25Kg (3.3.A1d)

Offside Rear Direction indicators not working (1.5.1c)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Drive chain slightly loose Spring link fitted at time of test (6.2.1d)

Steering movement slightly 'notchy' (2.2.1a)

Steering movement slightly 'notchy' (2.2.1a)

Front Brake disc(s) is slightly distorted (3.2.A1m)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))