2004 Fiat Doblo

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced SILL (6.1.1 (c) (i))

All direction indicators slightly discoloured (4.4.3 (a))

Central Items removed from driver's view prior to test ()

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Passenger seat(s) missing at time of test ()

All direction indicators slightly discoloured (4.4.3 (a))

Central Items removed from driver's view prior to test ()

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Passenger seat(s) missing at time of test ()

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement corroded (5.3.4 (a) (i))

Front Headlamp lens seriously defective both (4.1.1 (b) (ii))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement corroded (5.3.4 (a) (i))

Exhaust has a minor leak of exhaust gases and corroded (6.1.2 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Front Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Power steering ram has slight seepage from a joint (2.1.5 (a))

Rear Shock absorbers has a slightly worn bush both sides (5.3.2 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Rear Suspension spring mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Rear Vehicle structure slightly corroded within 30cm of towbar mounting both sides (6.1.6 (i) (i))

all front and rear brake ,steering and suspension components corroded

front headlamps misty

front inner wing panels corroded

n/s/r hand brake cable sleeve swollen

rear inner wheel archs corroded

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Power steering ram has slight seepage from a joint (2.1.5 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Rear Shock absorbers has a slightly worn bush both sides (5.3.2 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Rear Suspension spring mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

front inner wing panels corroded

front shocks corroded

rear inner wheel archs corroded

Exhaust has a minor leak of exhaust gases front flexi (6.1.2 (a))

Front Suspension arm corroded but not seriously weakened nearside and offside (5.3.3 (b) (i))

Nearside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear inner arch corroded

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Exhaust has a minor leak of exhaust gases front flexi (6.1.2 (a))

Front Suspension arm corroded but not seriously weakened nearside and offside (5.3.3 (b) (i))

Nearside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear inner arch corroded

Front Suspension arm corroded but not seriously weakened nearside and offside (5.3.3 (b) (i))

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Seat belt slightly damaged (7.1.2 (b) (i))

Rear Direction indicator slightly discoloured nearside and offside (4.4.3 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

eml light on

Offside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))

Nearside Front Suspension component ball joint likely to become detached bolts missing (5.3.4 (a) (ii)) DANGEROUS

Front Suspension arm corroded but not seriously weakened nearside and offside (5.3.3 (b) (i))

Nearside Rear Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Seat belt slightly damaged (7.1.2 (b) (i))

Rear Direction indicator slightly discoloured nearside and offside (4.4.3 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

eml light on

Fuel system component leaking filter housing (7.2.3)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Passenger seat(s) missing at time of test

high level brake light not working

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

front brake application uneven (3.7.B.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)