2006 Gas Gas Ec 300

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Front Tyre worn close to the legal limit rubber beginning to perish around tread blocks (5.2.3 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Front Tyre worn close to the legal limit rubber beginning to perish around tread blocks (5.2.3 (e))

Registration plate incorrect (0.1 (c))

Steering headbearing has slight free play (2.2.2 (f) (i))

Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))

Front Tyre worn close to the legal limit tread blocks beginning to perish (5.2.3 (e))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened also has slight run out (bend /warp) (1.1.14 (a) (ii))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

both tyres are more than 10 yrs old

Front Tyre worn close to the legal limit tread blocks beginning to perish (5.2.3 (e))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened also has slight run out (bend /warp) (1.1.14 (a) (ii))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Registration plate incorrect (0.1 (c))

Registration plate incorrect plate also delaminating (0.1 (c))

both tyres are more than 10 yrs old

Brake caliper slightly damaged but function not impaired (1.1.16 (a) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot pedal to reservior plundger pivot worn (1.1.1 (b))

Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear brake caliper sliders worn

Registration plate deteriorated but not likely to be misread (0.1 (b))

Stop lamp with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

exhaust system has advanced corosion

Registration plate incorrect (0.1 (c))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot pedal to reservior plundger pivot worn (1.1.1 (b))

Rear Position lamp light intensity obviously reduced (4.2.3 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear brake caliper sliders worn

Registration plate deteriorated but not likely to be misread (0.1 (b))

Stop lamp with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

exhaust system has advanced corosion

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake caliper(s) insecure (3.2.A1j)

Rear Rear wheel spindle loose (2.4.A.2b)

Registration plate delaminated (6.3.1.d)

Registration plate incorrect (6.3.1a)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Front Front shock absorber has light misting of stanchion (2.3.3)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Steering headbearing has slight free play (2.2.2)

Front Brake disc(s) cracked (3.2.A1g)

Rear reflector on motorcycle missing (1.4.1)

Registration plate incorrect (6.3.1a)

Front Front shock absorber has light misting of stanchion (2.3.3)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Steering headbearing has slight free play (2.2.2)

Registration plate incorrect (6.3.1a)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Stop lamp does not illuminate immediately a brake applies (1.3.1a) DANGEROUS

Exhaust noisy (7.1.2)

Chain guard missing

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Registration plate with character(s) which are not of equal width along their entire length (6.3.4a)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Drive chain sprocket slightly worn (6.2.1e)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Brake lever has inadequate reserve travel (3.1.3b)

Front Hydraulic brake control feels spongy (3.1.4a)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Headlamp switch faulty (1.2.4)

Horn control not readily accesible. (1.7.2a)

Horn not working (1.7.3a)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear reflector on motorcycle missing (1.4.1)

Rear wheel bearings have excessive free play (2.4.A.2c)

Registration plate not fixed vertically, or as close to vertical as is reasonably practical (6.3.2b)

Registration plate with character(s) which are not the correct height (6.3.4a)

Stop lamp affected by the operation of another lamp (1.3.2)

Drive chain worn but not considered excessive (6.2.1e)

Front Drive chain sprocket slightly worn (6.2.1e)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)