2008 BMW Z4

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Tyre pressure monitoring system warning lamp indicates a fault (4.1.D.4)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Shock absorber has a serious fluid leak (2.7.3)

Offside Stop lamp not working (1.2.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit and is badly worn on inner edge. (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

brake pad warning light stays on ,wire broken offside front.

engine management light stays on.

Offside Front Tyre worn close to the legal limit (4.1.E.1)

the brake pad warning light has come on

the engine management light stays on.

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

the engine management light stays on.

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

bonnet safety catch not working.

engine management light stays on.

the engine management light is on

the low coolent light is on

Under-trays fitted obscuring some underside components

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Play in steering rack inner joint(s)

there is a mouting snapped on the rear exhaust,still secure

Engine covers fitted obscuring some components in the engine bay

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

exhaust back box bracket broken, but still secure at time of testing