MOT Status
ValidMileage
57,473 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Power steering component has slight seepage from a component (2.1.5 (a))
Oil leak, but not excessive (8.4.1 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Tyre worn close to the legal limit and nearside rear (4.1.E.1)
under trays fitted
Offside Front Lower ball joint slight play
front discs scored
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Tyre worn close to the legal limit (4.1.E.1)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Under-trays fitted obscuring some underside components
Offside Anti-roll bar synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Tyre worn close to the legal limit (4.1.E.1)
Offside Tyre worn close to the legal limit (4.1.E.1)
advisery; both rear brake discs corroded
Coolant leak
advisery ; engine management lamp staying on
Offside Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Coolant leak
advisery ; engine management lamp staying on
Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ferrari 360?
Based on 28,453 MOT tests across 2,135 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YP02 CNC is a 2002 Ferrari 360 in Silver with a 3,586cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 87.5%.
Across all 2002 Ferrari 360 models, the average MOT pass rate is 89.5% with a typical mileage of 22,403 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ferrari 360 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 434 recorded failures. If you're considering buying YP02 CNC, it's worth having these areas checked by a mechanic before committing.
The Ferrari 360 typically stays on UK roads for around 27 years. At 24 years old, this Ferrari 360 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YP02 CNC?
You can check the full history of YP02 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YP02 CNC registered?
YP02 CNC is a 2002 Ferrari 360, first registered on 1 April 2002.
Is YP02 CNC safe to buy?
The MOT history for YP02 CNC shows 16 tests with a 87.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YP02 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YP02 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.