2002 Fiat Ducato

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch rear (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Windscreen washer not working (3.5 (a))

Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced chassis rail (6.1.1 (c) (i))

Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced floor corroded and holed (6.1.1 (c) (i))

Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill corroded and holed (6.1.1 (c) (i))

Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced outer sill corroded and holed (6.1.1 (c) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced chassis rail (6.1.1 (c) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced engine mount holed (6.1.1 (c) (i))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced floor corroded and holed (6.1.1 (c) (i))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill corroded and holed (6.1.1 (c) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Inner arch corrded and holed

Nearside Inner sill corroded and holed

Nearside Outer sill corroded and holed

Offside Front engine mount holed and corroded

Offside Front engine mount holed and corroded

Offside Rear Inner sill corroded and holed

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front inner arch corroded and holed

Nearside inner sill corroded and holed

Nearside outer sill corroded and holed

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Rear inner sill corroded and holed

Offside engine mount corroded and holed

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Front chassis rails corroded and holed

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front outer sill corroded and holed

Nearside floor holed

Nearside inner sill holed

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front chassis rail corroded and holed near engine mount

Offside floor holed

Offside inner sill holed

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front chassis rails corroded and holed

Nearside Front outer sill corroded and holed

Nearside floor holed

Nearside inner sill holed

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside floor holed

Offside front chassis leg corroded and holed near engine mount

Offside inner sill holed

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Front chassis rails badly corroded

Nearside Front outer sill corroded and holed

Nearside floor holed

Nearside inner sill holed

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front chassis leg holed by engine mount

Offside floor holed

Offside inner sill holed

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Windscreen washer not working (3.5 (a))

Front Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Front chassis rails badly corroded

Nearside Front outer sill corroded and holed

Nearside floor holed

Nearside inner sill holed

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front chassis leg holed by engine mount

Offside floor holed

Offside inner sill holed

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Front Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front outer sill holed

Nearside inner sill holed

Nearside outrigger holed

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front chassis leg holed by engine mount and rad carrier

Offside Front outer sill holed

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

both front chassis rails badly corroded

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front subframe mount (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear subframe mount (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top mounting (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring hanger (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front outer sill holed

Nearside Front wheel arch badly corroded

Nearside inner sill holed

Nearside out rigger holed

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front chassis leg holed by engine mount and rad carrier

Offside Front outer sill holed

Offside Front wheel arch badly corroded

Offside inner sill holed

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear valance holed

both front chassis rails badly corroded

Front Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Nearside Front inner wheel arch corroded and holed

Nearside Front outer sill holed

Nearside inner sill holed

Nearside outrigger holed

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front chassis leg by engine mount and rad carrier holed

Offside Front outer sill holed

Offside inner sill holed

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Rear valance holed

both front chassis rails badly corroded

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front inner arch holed

Nearside chassis leg corroded

Nearside inner sill holed

Nearside outer sill holed

Nearside outrigger holed

Offside Front chassis leg holed close to engine mount and rad carrier

Offside inner sill holed

Offside outer sill holed

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Rear valance holed

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front chassis leg corroded

Nearside Front inner arch holed

Nearside inner sill holed

Nearside outer sill holed

Nearside outrigger holed

Offside Front chassis leg holed close to engine mount and rad carrier

Offside inner sill holed

Offside outer sill holed

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Rear valance holed

Nearside Front inner arch holed

Nearside centre outrigger holed

Nearside inner sill / floor holed

Offside Front hole at engine mount

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Rear valance holed

chassis corrosion

Nearside Rear Suspension spring mounting prescribed area is excessively corroded front hanger (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is excessively corroded upper (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded spring hanger (2.4.A.3)

Nearside Inner sill holed

Nearside Front sill / floor holed

Offside Front chassis holed within 30cm of engine mount

Rear valance holed

power steering pipes corroded

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Supplementary Restraint System warning lamp does not illuminate (5.4.2)

n/s and o/s inner sills corroded and holed

n/s and o/s outer sills corroded and holed

n/s/f inner arch holed

o/s/f engine mounting corroded and holed

o/s/f inner arch holed

subframe mountings corroded

Nearside Front Inner Suspension component mounting prescribed area is excessively corroded chassis outrigger (2.4.A.3)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Supplementary Restraint System warning lamp does not illuminate (5.4.2)

n/s and o/s inner sills holed

n/s and o/s outer sills corroded and holed

n/s/f inner arch corroded and holed

o/s/f engine mounting corroded and holed

o/s/f inner arch corroded and holed

subframe mountings corroded

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Supplementary Restraint System warning lamp does not illuminate (5.4.2)

front chassis legs corroded

n/s inner and outer sills corroded and holed

o/s inner and outer sills corroded and holed

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

n/s and o/s inner and outer sills corroded and holed outside 30cm of structual mountings

n/s/f and o/s/f chassis rails corroded

n/s/f jacking point holed

Nearside Headlamp aim too high (1.8)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Rear Brake load sensing valve seized (3.6.E.3)

n/s and o/s inner and outer sills corroded and holed outside 30cm of structual mountings

n/s/f and o/s/f chassis rails corroded

n/s/f jacking point holed

Nearside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Supplementary Restraint System warning lamp does not illuminate (5.4.2)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nearside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nail in offside front tyre

Front Fuel system component leaking (7.2.3)

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Leaf spring eye defective (shackle) (2.4.B.1b)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nail in offside front tyre

Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Suspension joint nearside lower dust cover split/missing

Suspension joint offside lower dust cover split/missing

Brake load sensing valve linkage stiff (3.6.E.3)

air bag warning light on.

Nearside Headlamp aim too low (1.8)

Nearside Rear brake disc excessively pitted (3.5.1h)

Offside Rear brake disc excessively pitted (3.5.1h)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Steering column will not lock in a fixed position (adjustable type) (2.1.2a)

Brake load sensing valve linkage stiff (3.6.E.3)

air bag warning light on.

Brake load sensing valve linkage stiff (3.6.E.3)

Offside Rear brake disc slightly pitted (3.5.1h)

Offside Rear brake disc slightly scored (3.5.1h)

Power steering component(s) has slight seepage from a component (2.3.3b)

Suspension joint nearside lower dust cover split/missing

nearside front brake flexi adrift from clamp

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Registration plate lamp not working (1.1.5c)

Nearside Rear rear brakes release unevenly (3.7.B.4) DANGEROUS

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

Offside Rear rear brake application uneven (3.7.B.2) DANGEROUS

Brake load sensing valve linkage stiff (3.6.E.3)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear brake disc slightly pitted (3.5.1h)

Offside Rear brake disc slightly scored (3.5.1h)

Power steering component(s) has slight seepage from a component (2.3.3b)

Suspension joint nearside lower dust cover split/missing

nearside front brake flexi adrift from clamp

evidence of grease around o/s driveshaft gaitor

evidence of sump badly corroding