2003 Jaguar XK8

General underbody corrosion and undersealed in places

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

MIL Light On

Oil leak, but not excessive (8.4.1 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Headlamp levelling device cannot be operated from the driver's seat (4.1.5 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer arch (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer arch (5.3.6 (a) (i))

Rear fog lamp tell-tale not working (4.9.1 (a) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

EML Light On

Oil leak, but not excessive (8.4.1 (a) (i))

Front All direction indicators slightly discoloured (4.4.3 (a))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Outer sill (6.1.1 (c) (i))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Chassis near to sub frame mounting (6.2.2 (d) (i))

Interior rear view mirror missing,mirrors positioned A&B Present.

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Outer Drive shaft flexible coupling slightly deteriorated (6.1.7 (d) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Outer Drive shaft flexible coupling slightly deteriorated (6.1.7 (d) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced front and rear (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Brakes imbalanced across an axle pull to left (1.2.1 (b) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Windscreen washer provides insufficient washer liquid (3.5 (a))

Rear fog lamp switch inoperative (4.5.3 (a) (ii))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Rear fog lamp tell tale not working (1.3.1b)

Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Brake pipe excessively corroded nearside front to rear (3.6.B.2c)

Brake pipe excessively corroded rear of offside front to rear (3.6.B.2c)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

nearside front floor corroded through

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

nearside front floor corroded through

Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Lower Shock absorber has an excessively worn bush (2.7.4)

Nearside Front Upper Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Lower Shock absorber has an excessively worn bush (2.7.4)

Offside Front Rear wheel bearing has excessive play (2.6.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Lower Shock absorber has an excessively worn bush (2.7.4)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Rear wheel bearing has slight play (2.6.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Offside Track rod end ball joint has slight play (2.2.B.1f)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

nearside front floor is excessiveley corroeded outside the prescribed areas

Engine covers fitted obscuring some components in the engine bay

Front Brake pad(s) wearing thin (3.5.1g)

Engine covers fitted obscuring some components in the engine bay

Front Brake pad(s) wearing thin (3.5.1g)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)