2004 Mazda Premacy

Brake pipe slightly corroded os and ns rear (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened worn (3.5.1i)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Lower Suspension arm slightly distorted (2.4.G.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Seat belt anchorage prescribed area is corroded but not considered excessive os and ns outer sills and floors to sills (5.2.6)

Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt os and ns front lower (2.4.G.2)

Suspension arm corroded but not seriously weakened os and ns rear (2.4.G.1)

Suspension arm rubber bush deteriorated but not resulting in excessive movement os and ns front lower (2.4.G.2)

Suspension component mounting prescribed area is corroded but not considered excessive os and ns rear inner sills,body/ chassis (2.4.A.3)

front and rear exhaust flanges deteriorated

ns front chassis and front cross member showing signs of corrosion in non prescribed areas

power steering pump mounting bolt missing, pump still secure

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Suspension component mounting prescribed area is excessively corroded inner flitch under bonnet near strut top mount (2.4.A.3)

Offside rear brake binding (3.7.B.1)

Registration plate lamp not working (1.1.C.1d)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Brake pipe slightly corroded os and ns rear (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened worn (3.5.1i)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Lower Suspension arm slightly distorted (2.4.G.1)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Seat belt anchorage prescribed area is corroded but not considered excessive os and ns outer sills and floors to sills (5.2.6)

Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt os and ns front lower (2.4.G.2)

Suspension arm corroded but not seriously weakened os and ns rear (2.4.G.1)

Suspension arm rubber bush deteriorated but not resulting in excessive movement os and ns front lower (2.4.G.2)

Suspension component mounting prescribed area is corroded but not considered excessive os and ns rear inner sills,body/ chassis (2.4.A.3)

front and rear exhaust flanges deteriorated

ns front chassis and front cross member showing signs of corrosion in non prescribed areas

power steering pump mounting bolt missing, pump still secure

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear facing (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear facing (2.4.G.2)

front exhaust heat shield insecure

offside front and offside rear tyre wearing on inner edge

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear facing (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear facing (2.4.G.2)

front exhaust heat shield insecure

offside front and offside rear tyre wearing on inner edge

Brake pipe slightly corroded os and ns rear (3.6.B.2c)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Lower Suspension arm slightly distorted (2.4.G.1)

Rear Anti-roll bar has slight play in a pin/bush mounting bushes (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Seat belt anchorage prescribed area is corroded but not considered excessive floors to sills (5.2.6)

Suspension arm corroded but not seriously weakened os and ns rear (2.4.G.1)

Suspension component mounting prescribed area is corroded but not considered excessive os and ns rear inner sills and body/chassis (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive os and ns rear outer sills (2.4.A.3)

front brake discs worn slightly

small deep cut in os rear tyre

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch at front and sill end (2.4.A.3)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch at front and sill end (2.4.A.3)

Registration plate lamp not working (1.1.C.1d)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Brake pipe slightly corroded os and ns rear (3.6.B.2c)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Lower Suspension arm slightly distorted (2.4.G.1)

Rear Anti-roll bar has slight play in a pin/bush mounting bushes (2.4.G.2)

Seat belt anchorage prescribed area is corroded but not considered excessive floors to sills (5.2.6)

Suspension arm corroded but not seriously weakened os and ns rear (2.4.G.1)

Suspension component mounting prescribed area is corroded but not considered excessive os and ns rear inner sills and body/chassis (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive os and ns rear outer sills (2.4.A.3)

front brake discs worn slightly

small deep cut in os rear tyre

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Lower Suspension arm slightly distorted (2.4.G.1)

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension arm corroded but not seriously weakened (2.4.G.1)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Lower Suspension arm slightly distorted (2.4.G.1)

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension arm corroded but not seriously weakened (2.4.G.1)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Body has slight corrosion (6.1.B.2)

Offside Rear Body has slight corrosion (6.1.B.2)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front All position lamps not working (1.1.A.3b)

Nearside Rear Body has slight corrosion (6.1.B.2)

Offside Rear Body has slight corrosion (6.1.B.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)