MOT Status
ValidMileage
121,793 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material nearside and offside rear (1.1.11 (c))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Sub-frame corroded but not seriously weakened rear axle beam (5.3.3 (b) (i))
Sub-frame pin or bush worn but not resulting in excessive movement nearside and offside rear (5.3.4 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside rear axle beam brackets (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Headlamp has a product on the lens so that the light output is severely reduced nearside and offside (4.1.4 (b))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Brake pipe corroded, covered in grease or other material nearside and offside rear (1.1.11 (c))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Sub-frame corroded but not seriously weakened rear axle beam (5.3.3 (b) (i))
Sub-frame pin or bush worn but not resulting in excessive movement nearside and offside rear (5.3.4 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside rear axle beam brackets (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Brake pipe excessively corroded From rear brake hose to drum brake (1.1.11 (c))
Offside Rear Brake pipe excessively corroded Front abs pump to rear flexi (1.1.11 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Inner Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insecure (6.1.7 (g) (ii))
Rear Direction indicator incorrect colour both faded (4.4.3 (a))
Offside Rear Outer Brake pipe corroded, covered in grease or other material corroded. (1.1.11 (c))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Headlamp light intensity severely reduced both (4.1.4 (a))
Nearside Rear Body component damaged and likely to cause injury (6.2.1 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge low on outer edge (5.2.3 (e))
Offside Rear Outer Brake pipe corroded, covered in grease or other material corroded. (1.1.11 (c))
Brake pipe corroded, covered in grease or other material rear of o/s main pipe (1.1.11 (c))
Central Stop lamp(s) not working (4.3.1 (a) (ii))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Headlamp light intensity severely reduced both (4.1.4 (a))
Nearside Front Outer Brake pipe excessively corroded (1.1.11 (c))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Brake pipe corroded, covered in grease or other material rear of o/s main pipe (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Upper Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Offside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Stop lamp remains on when the brakes are released (1.2.1e)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Centre Stop lamp not working (1.2.1b)
Nearside Headlamp aim too low (1.8)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp aim too low (1.8)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Outer Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Stop lamp not working (1.2.1b)
How Reliable is the Ford Fusion?
Based on 1,954,614 MOT tests across 109,115 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YP06 HKC is a 2006 Ford Fusion in Silver with a 1,596cc petrol engine. This vehicle has been through 29 MOT tests with a personal pass rate of 65.5%.
Across all 2006 Ford Fusion models, the average MOT pass rate is 74.1% with a typical mileage of 58,954 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Fusion fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 41,160 recorded failures. If you're considering buying YP06 HKC, it's worth having these areas checked by a mechanic before committing.
The Ford Fusion typically stays on UK roads for around 24 years. At 20 years old, this Ford Fusion is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YP06 HKC?
You can check the full history of YP06 HKC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YP06 HKC registered?
YP06 HKC is a 2006 Ford Fusion, first registered on 24 April 2006.
Is YP06 HKC safe to buy?
The MOT history for YP06 HKC shows 29 tests with a 65.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YP06 HKC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YP06 HKC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.