MOT Status
ExpiredMileage
90,569 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake pad(s) wearing thin BOTH (1.1.13 (a) (ii))
Offside Front brake hose not secured
Offside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill corroded/holed (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Brake pad(s) wearing thin BOTH (1.1.13 (a) (ii))
Offside Front brake hose not secured
Offside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill corroded/holed (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill {jacking point) (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch within 30cm off rear shocker (5.3.6 (a) (i))
Front Brake pad(s) wearing thin both (1.1.13 (a) (ii))
Front Suspension arm ball joint dust cover severely deteriorated both (5.3.4 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive wheel arch corroded/holed (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear jacking point corroded/holed
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting behind wheel (6.2.2 (d) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in front of wheel (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Inner Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (i))
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
Offside Rear Direction indicator damaged, but still visible from a reasonable distance (1.4.A.2e)
Offside Rear Direction indicator damaged, but still visible from a reasonable distance (1.4.A.2e)
Front Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
advisery; nearside front tyre low pressure
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
How Reliable is the Daihatsu Copen?
Based on 38,710 MOT tests across 2,415 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YP06 ZWC is a 2006 Daihatsu Copen in Silver with a 659cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2006 Daihatsu Copen models, the average MOT pass rate is 77.0% with a typical mileage of 39,627 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Daihatsu Copen fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 717 recorded failures. If you're considering buying YP06 ZWC, it's worth having these areas checked by a mechanic before committing.
The Daihatsu Copen typically stays on UK roads for around 23 years. At 20 years old, this Daihatsu Copen is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YP06 ZWC?
You can check the full history of YP06 ZWC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YP06 ZWC registered?
YP06 ZWC is a 2006 Daihatsu Copen, first registered on 23 August 2006.
Is YP06 ZWC safe to buy?
The MOT history for YP06 ZWC shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YP06 ZWC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YP06 ZWC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.