MOT Status
ExpiredMileage
137,434 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Nearside Rear Outer Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Front Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt bottom balljoint (2.1.3 (g) (ii))
Nearside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Nearside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired outer sill (6.2.2 (d) (ii)) DANGEROUS
Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired outer sill (6.2.2 (d) (ii)) DANGEROUS
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Front Sub-frame is deformed and structural rigidity is significantly reduced (6.1.1 (a) (i))
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Tyre worn close to the legal limit INNER SHOULDER (4.1.E.1)
Offside Front Tyre worn close to the legal limit INNER SHOULDER (4.1.E.1)
Play in steering rack inner joint(s) ()
engine management warning lamp illuminated
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Nearside Front Tyre worn close to the legal limit INNER SHOULDER (4.1.E.1)
Offside Front Tyre worn close to the legal limit INNER SHOULDER (4.1.E.1)
Play in steering rack inner joint(s) ()
engine management warning lamp illuminated
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
TPMS indicates low pressures
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Dodge Caliber?
Based on 69,277 MOT tests across 4,774 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YP07 SWN is a 2007 Dodge Caliber in Red with a 1,968cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 59.1%.
Across all 2007 Dodge Caliber models, the average MOT pass rate is 66.5% with a typical mileage of 66,005 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Dodge Caliber fails its MOT is suspension arm has excessive play in a ball joint, accounting for 3,411 recorded failures. If you're considering buying YP07 SWN, it's worth having these areas checked by a mechanic before committing.
The Dodge Caliber typically stays on UK roads for around 20 years. At 19 years old, this Dodge Caliber is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YP07 SWN?
You can check the full history of YP07 SWN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YP07 SWN registered?
YP07 SWN is a 2007 Dodge Caliber, first registered on 20 June 2007.
Is YP07 SWN safe to buy?
The MOT history for YP07 SWN shows 22 tests with a 59.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YP07 SWN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YP07 SWN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.