2007 Chevrolet Matiz

Front Head light beam pattern getting very weak recommend cleaning lens

Front Oil level below minimum, topped up.

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Rear sill corroded (6.1.1 (c) (i))

Front Power steering ram leaking Leaking fluid i 2 places, off side and near side (2.1.5 (a))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear sill corroded and holed (6.1.1 (c) (i))

Front Head light beam pattern getting very weak recommend cleaning lens

Front Oil level below minimum, topped up.

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Rear sill corroded (6.1.1 (c) (i))

Front Engine oil level below minimum, 2.5 ltrs added

Front Oil leak, but not excessive Slight leak from sump (8.4.1 (a) (i))

Front Power steering fluid level below minimum (2.1.5 (b) (i))

Front Power steering ram has slight seepage from a joint (2.1.5 (a))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement Split (5.3.4 (a) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Front Engine oil level below minimum, 2.5 ltrs added

Front Oil leak, but not excessive Slight leak from sump (8.4.1 (a) (i))

Front Power steering fluid level below minimum (2.1.5 (b) (i))

Front Power steering ram has slight seepage from a joint (2.1.5 (a))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement Split (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Emissions not tested (8.2.1.2 (d))

Front Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front brake disc in such a condition that it is seriously weakened both sides (3.5.1i)

Nearside Front Brake pipe excessively corroded inner wing (3.6.B.2c)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Brake pipe excessively corroded main run before flexi (3.6.B.2c)

Rear Exhaust system not adequately supported bracket broken off (7.1.1)

Offside Front front brake binding (3.7.B.1) DANGEROUS

Brake pipe slightly corroded all steel brake pipes corroded (3.6.B.2c)

Front Exhaust has a minor leak of exhaust gases on flexi pipe (7.1.2)

Offside Front Brake pipe slightly corroded inner wing (3.6.B.2c)

Front Tyre worn close to the legal limit both on limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Power steering pipe(s) or hose(s) has slight seepage from a seal rack (2.3.3b)

Front Tyre worn close to the legal limit both on limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front All position lamps not working (1.1.A.3b)

Offside Front Power steering pipe(s) or hose(s) has slight seepage from a seal rack (2.3.3b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust system not adequately supported (7.1.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Anti-lock braking system component excessively damaged (3.4.2)

Fuel system component leaking (7.2.3)

Offside Rear wheel bearing rough when rotated (2.6.1)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Oil leak