MOT Status
ExpiredMileage
149,075 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Play in steering rack inner joint(s) ()
bodywork damaged
general underbody corrosion
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Play in steering rack inner joint(s) ()
bodywork damaged
general underbody corrosion
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Headlamp aim unable to be tested (4.1.2 (b))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front bumper loose
Offside Rear bumper damaged
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Position lamp has a product on the lens or light source which obviously reduces light intensity nearside and offside (4.2.3 (b) (i))
Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Suspension component mounting prescribed area damaged but not considered excessive n/s/f, n/s/r, o/s/f, o/s/r (5.3.6 (a) (i))
all front and rear suspension components corroded
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened n/s & o/s (5.3.3 (b) (i))
Offside Front Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened n/s & o/s (5.3.3 (b) (i))
Central Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Lower Suspension arm corroded but not seriously weakened o/s & n/s (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Front Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Central Upper Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Lower Suspension arm corroded but not seriously weakened o/s & n/s (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar ball joint has slight play o/s and n/s (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened all suspension arms corroded (5.3.3 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Inner Suspension arm has excessive play in a track control arm inner bush (2.5.B.2b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Inner Suspension arm has excessive play in a track control arm inner bush (2.5.B.2b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Inner Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Inner Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
under flour with covers not fully checked
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YP08 CVG is a 2008 Mazda 3 in Blue with a 1,598cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2008 Mazda 3 models, the average MOT pass rate is 73.8% with a typical mileage of 66,871 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying YP08 CVG, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 18 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YP08 CVG?
You can check the full history of YP08 CVG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YP08 CVG registered?
YP08 CVG is a 2008 Mazda 3, first registered on 22 April 2008.
Is YP08 CVG safe to buy?
The MOT history for YP08 CVG shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YP08 CVG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YP08 CVG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.