2008 Yamaha Yzf

Central Front Steering control fouling between components which interferes with the free movement of the steering Top yoke hits steering lock braket (2.1.2a)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Drive chain excessively loose (6.2.1d)

Rear Drive chain worn to excess (6.2.1e)

Direction indicator slightly discoloured (orange has faded)

Nearside Front Clutch lever mount has small crack

Nearside Front Clutch lever shortened. (6.2.1g)

Nearside Front Clutchlever pivot worn

Nearside Front One position not working

Rear Tyre worn close to the legal limit (4.1.3(ii))

Direction indicator slightly discoloured All indicator discoloured (faded orange) (1.5.1b)

Nearside Front Clutch lever mount has small crack

Nearside Front Clutch lever pivot worn

Nearside Front Clutch lever shortened. (6.2.1g)

Nearside Front One position light not working

Rear Tyre worn close to the legal limit (4.1.3(ii))

Central Front Steering control fouling between components which interferes with the free movement of the steering Top yoke hits steering lock bracket (2.1.2a)

Direction indicator slightly discoloured All indicator discoloured (faded orange) (1.5.1b)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Nearside Front Clutch lever mount has small crack

Nearside Front Clutch lever pivot worn

Nearside Front Clutch lever shortened. (6.2.1g)

Nearside Front One position light not working

Rear Drive chain excessively loose (6.2.1d)

Rear Drive chain worn to excess (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain excessively loose (6.2.1d)

Drive chain sprocket carrier worn to excess (6.2.1e)

Drive chain sprocket worn to excess (6.2.1e)

Drive chain worn to excess (6.2.1e)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Clutch lever shortened. (6.2.1g)

Steering movement slightly 'notchy' (2.2.1b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Offside Direction indicators flashing more than 120 times per minute (1.5.1c)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain slightly loose (6.2.1d)

Drive chain slightly loose (6.2.1d)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Rear reflector on motorcycle missing (1.4.1)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Direction indicator missing (1.5.1a)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Nearside Rear Footrest insecure (6.2.1a)

Rear Direction indicator missing (1.5.1a)

Rear position lamp insecure (1.1.1c)

Rear reflector on motorcycle missing (1.4.1)

Registration plate insecure (6.3.1b)

Seat insecure (6.2.1a)

Clutch lever incorrectly positioned. (6.2.1g)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))