MOT Status
ExpiredMileage
222,403 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Driver's seat with a defective structure (6.2.5 (a) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Front Headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Seat belt flexible stalk damaged (7.1.2 (b) (i))
Rear Coil spring corroded both side (5.3.1 (b) (i))
Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill both side (6.1.1 (c) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Position lamp not working side (4.2.1 (a) (ii))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Position lamp not working side (4.2.1 (a) (ii))
Nearside Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Bumper mountings corroded but not likely to become detached both side (6.1.4 (a) (i))
Front Headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))
Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Seat belt slightly damaged (7.1.2 (b) (i))
Offside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))
Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill both side (6.2.2 (d) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Front Bumper mountings corroded but not likely to become detached both side (6.1.4 (a) (i))
Front Headlamp has a product on the lens but not seriously reducing light output both side (4.1.4 (b))
Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Seat belt slightly damaged (7.1.2 (b) (i))
Offside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))
Rear Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill both side (6.2.2 (d) (i))
Front Windscreen wiper blade defective both side (3.4 (b) (i))
Nearside Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Nearside Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Offside Front Inner Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Front Windscreen wiper blade defective both side (3.4 (b) (i))
Nearside Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Nearside Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Front Brake disc worn, but not excessively both side (1.1.14 (a) (i))
Front and rear exhaust corroded
Nearside Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Brake disc worn, but not excessively both side (1.1.14 (a) (i))
Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Front Seat belt webbing significantly weakened (7.1.2 (b) (ii)) DANGEROUS
Front Brake disc worn, but not excessively both side (1.1.14 (a) (i))
Front and rear exhaust corroded
Nearside Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Brake disc worn, but not excessively both side (1.1.14 (a) (i))
Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
under tray fitted
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Rear Brake pad(s) wearing thin (3.5.1g)
under tray fitted
Nearside Front Tyre has had the tread recut (4.1.D.1c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YP08 MRU is a 2008 Mazda 3 in Black with a 1,598cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 61.9%.
Across all 2008 Mazda 3 models, the average MOT pass rate is 73.8% with a typical mileage of 66,871 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying YP08 MRU, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 18 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YP08 MRU?
You can check the full history of YP08 MRU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YP08 MRU registered?
YP08 MRU is a 2008 Mazda 3, first registered on 2 May 2008.
Is YP08 MRU safe to buy?
The MOT history for YP08 MRU shows 21 tests with a 61.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YP08 MRU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YP08 MRU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.