2005 Fiat Punto

Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mounting (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Horn not working (7.7 (a))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Rear Exhaust system insecure (6.1.2 (a))

Items removed from driver's view prior to test ()

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Corrosion on under body and suspension components

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Rear Exhaust mounting defective Rubber deteriorated (6.1.2 (a))

Slight movement in drivers seat base

Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill x2 (central and front) (6.1.1 (c) (i))

Corrosion on under body and suspension components

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Rear Exhaust mounting defective Rubber deteriorated (6.1.2 (a))

Slight movement in drivers seat base

Corrosion on under body and suspension components

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Exhaust mounting defective Bracket corroded (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Brake cable damaged Handbrake (1.1.15 (a))

Offside Rear Brake cable damaged Handbrake (1.1.15 (a))

Corrosion on under body and suspension components

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Exhaust mounting defective Bracket corroded (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Bumper damaged

Front Exhaust mounting defective Bracket (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Sill (6.2.2 (d) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Bumper damaged

Front Exhaust mounting defective Bracket (6.1.2 (a))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material in places (1.1.11 (c))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

rusting on underbody and suspension

seatbelts slightly freyed and slow returning

Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Exhaust system insecure rubber split (6.1.2 (a))

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Brake pipe corroded, covered in grease or other material in places (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

n/s/r tyre badly perished almost to cords on shoulder

rusting on underbody and suspension

seatbelts slightly freyed and slow returning

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

n/s/f tyre tread getting low

n/s/r tyre tread low and sidewall perished

rusting in other places on underbody and suspension

Offside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength in subframe mounting prescribed area (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Offside Rear reflector insecure (4.8.1 (b) (i))

Offside Windscreen wiper blade defective (3.4 (b) (i))

n/s/f tyre tread getting low

n/s/r tyre tread low and sidewall perished

rusting in other places on underbody and suspension

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Offside Rear Upper Seat belt anchorage prescribed area is corroded but not considered excessive arch (7.1.1 (a) (i))

Offside Rear reflector insecure (4.8.1 (b) (i))

n/s/r tyre perishing and tread getting low

rusting on underbody and suspension

Offside Front Seat belt retracting mechanism defective (7.1.2 (e))

Offside Front Side repeater light intensity significantly reduced (4.4.3 (a))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

rusting on underbody and suspension

Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Offside Rear Upper Seat belt anchorage prescribed area is corroded but not considered excessive arch (7.1.1 (a) (i))

Offside Rear reflector insecure (4.8.1 (b) (i))

n/s/r tyre perishing and tread getting low

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both sides (2.4.G.2)

Rear reflector obscured but not more than 50% part missing (1.5.1b)

n/s/r tyre badly agecracked

rusting on underbody and suspension

seatbelts freying and slow returning

slight uneven rear brake application

Offside Side repeater deteriorated, but still visible from a reasonable distance (1.4.A.2e)

drivers seatbelt freying and slow returning

n/s/r tyre badly agecracked

o/s/f tyre tread around 3mm and agecracked

rusting on underbody and suspension

slight uneven rear brake application

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Lower Subframe mounting prescribed area is excessively corroded arch (2.4.A.3)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Side repeater deteriorated, but still visible from a reasonable distance (1.4.A.2e)

drivers seatbelt freying and slow returning

n/s/r tyre badly agecracked

o/s/f tyre tread around 3mm and agecracked

rusting on underbody and suspension

slight uneven rear brake application

frount seat belts slow returning

n/s rear tyre age cracking

rear coil springs corroding

under body rusting

uneven rear brake application

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

exhaust corroding

rusting on underbody and suspension

seatbelts slow returning

slight uneven rear brake application

wipers splitting

Centre Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Offside Front coil spring broken (2.4.C.1a)

Offside Rear reflector missing (1.5.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

exhaust corroding

rusting on underbody and suspension

seatbelts slow returning

slight uneven rear brake application

wipers splitting

n/s/f tyre tread wearing on edges

slight freying on seatbelts

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Registration plate lamp not illuminating the registration plate (1.1.C.1e)

discs wearing thin and corroded

n/s/f brake hose running close to wheel

n/s/f brake slightly binding

n/s/f tyre tread wearing on edges

slight freying on seatbelts

brake discs corroding

o/s rear tyre age cracking

All position lamps not working (1.1.A.3b)

brake discs corroding

o/s rear tyre age cracking

Offside Rear Shock absorber has an excessively worn bush (2.7.4)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too low and too far to the right. (1.8)

both front tyres worn nearly to wear indicators

front disc pads quite worn

Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)

back box exhaust collapsed

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

back box exhaust collapsed