2004 Honda CG125

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Nearside Front Lower Brake pad(s) close to minimum limit (1.1.13 (a))

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive borderline (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear Drive chain sprocket slightly worn borderline (6.2.1e)

Rear Tyre valve stem slightly misaligned borderline (4.1.2c)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Steering headbearing has slight free play (2.2.2)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive borderline (6.2.1e)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Drive chain sprocket slightly worn borderline (6.2.1e)

Rear Tyre valve stem slightly misaligned borderline (4.1.2c)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Steering headbearing has slight free play (2.2.2)

Drive chain worn but not considered excessive (6.2.1e)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim too high (1.6)

Rear reflector on motorcycle missing (1.4.1)

Drive chain worn but not considered excessive (6.2.1e)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Brake lever pivots slightly worn (3.1.3a)

Front suspension has a slightly reduced damping effect (2.3.6c)

Front Front suspension has a slightly reduced damping effect (2.3.6c)

rear tyre perished

Front Front suspension has a slightly reduced damping effect (2.3.6c)

Headlamp aim too high (1.6)

rear tyre perished

Front Brake component is severely distorted (3.1.5)

Front Brake master cylinder fluid level dangerously low (3.2.B1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Handlebar deformed (2.1.1b)

Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking (6.1.1c)

Rear Drive chain excessively loose (6.2.1d)

Rear Drive chain worn to excess (6.2.1e)

Rear Fairings so located that it is likely to impede the steering (2.1.2e)

Rear Registration plate incorrect (6.3.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Centre Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))