2006 Mitsubishi Lancer

Front brake disc worn, pitted or scored, but not seriously weakened to rear all four (3.5.1i)

Front coil spring corroded to rear all four (2.4.C.1b)

sills covers fited

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emits excessive dense blue smoke during acceleration (7.3.A.2c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pipe inadequately clipped both new pipes (3.6.B.1)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emits excessive dense blue smoke during acceleration (7.3.A.2c)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Rear Brake pipe excessively corroded to front both sides (3.6.B.2c)

Exhaust emits blue smoke during acceleration (7.3.A.2c)

Nearside Rear Brake pipe slightly corroded to front (3.6.B.2c)

Offside Rear Brake pipe slightly corroded to front (3.6.B.2c)

Brake pad(s) wearing thin o/s/r (3.5.1g)

Suspension arm rubber bush deteriorated but not resulting in excessive movement front plus rear (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Shock absorber has an excessively worn bush o/s/f (2.7.4)

brake disc in such a condition that it is seriously weakened n/s/r (3.5.1i)

Brake pad(s) wearing thin o/s/r (3.5.1g)

Suspension arm rubber bush deteriorated but not resulting in excessive movement front plus rear (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

outer sill covers fitted

Nearside Front Anti-lock braking system wiring excessively damaged (3.4.3)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp aim too high (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

Rear fog lamp not working (1.3.2b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

outer sill covers fitted

Nearside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Play in steering rack inner joint(s)

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Vehicle's internal headlight adjuster altered to recheck lights

Battery insecure (1.9.1)

Front Electrical wiring insecure (1.9.2a)

Nearside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

Play in steering rack inner joint(s)

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Vehicle's internal headlight adjuster altered to recheck lights

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Play in steering rack inner joint(s)

sill covers fitted

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside rear brake binding (3.7.B.1)

Offside Front position lamp(s) not working (1.1.A.3b)

rear brake application uneven (3.7.B.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Play in steering rack inner joint(s)

sill covers fitted

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Front drive shaft coupling flexible rubber or fabric coupling unit slightly cracked (2.5.C.1d)

Front registration plate margin less than the minimum requirement (6.3.4g)

Offside Front Headlamp aim too high (1.8)

Rear registration plate margin less than the minimum requirement (6.3.4g)

Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Front drive shaft coupling flexible rubber or fabric coupling unit slightly cracked (2.5.C.1d)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)