MOT Status
ExpiredMileage
121,219 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength mounting area (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer and inner sill (7.1.1 (a) (i))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))
Rear Service brake binding but not excessively both sides (1.2.1 (f))
vehicle tested under the wet condition
Front Brake pipe corroded, covered in grease or other material both front to rear brake pipes greased at rear (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Indicator switch faulty (4.4.2 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both rear axle front bushs (5.1.2 (b) (i))
Rear Brake hose has slight corrosion to ferrule both rear hoses (1.1.12 (f) (i))
Rear both rear wheels slightly tight to turn
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Brake pipe corroded, covered in grease or other material both front to rear brake pipes greased at rear (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Indicator switch faulty (4.4.2 (a) (i))
Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn both rear axle front bushs (5.1.2 (b) (i))
Rear Brake hose has slight corrosion to ferrule both rear hoses (1.1.12 (f) (i))
Rear both rear wheels slightly tight to turn
Rear rear exhaust shield loose
Front Brake pipe corroded, covered in grease or other material both front to rear at rear greased (1.1.11 (c))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement axle forward bush (5.3.4 (a) (i))
Rear Brake pipe corroded, covered in grease or other material both rear pipes greased (1.1.11 (c))
Hazard warning switch inoperative (4.4.2 (a) (ii))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Front Brake pipe corroded, covered in grease or other material both front to rear at rear greased (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement axle forward bush (5.3.4 (a) (i))
Rear Brake pipe corroded, covered in grease or other material both rear pipes greased (1.1.11 (c))
Front Brake pipe corroded, covered in grease or other material both front to rear greased at rear (1.1.11 (c))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Front Brake pipe corroded, covered in grease or other material both front to rear greased at rear (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material to rear at rear (1.1.11 (c))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Rear Exhaust emissions likely to be affected by an exhaust leak centre pipe (8.2.1.1 (b))
Front Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material to rear at rear (1.1.11 (c))
Front brake disc worn, pitted or scored, but not seriously weakened inner faces (3.5.1i)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded to rear (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Hazard warning lamps inoperative (1.4.B.1b)
Hazard warning tell tale not working correctly (1.4.B.1e)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Rear fog lamp adversely affected by the operation of another lamp (1.3.2f)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Brakes imbalanced across an axle (3.7.B.5b)
Front brake disc in such a condition that it is seriously weakened (3.5.1i) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YR06 TWE is a 2006 Peugeot 107 in Black with a 998cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 56.5%.
Across all 2006 Peugeot 107 models, the average MOT pass rate is 72.9% with a typical mileage of 58,420 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying YR06 TWE, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 20 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of YR06 TWE?
You can check the full history of YR06 TWE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YR06 TWE registered?
YR06 TWE is a 2006 Peugeot 107, first registered on 13 May 2006.
Is YR06 TWE safe to buy?
The MOT history for YR06 TWE shows 23 tests with a 56.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YR06 TWE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YR06 TWE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.