2008 Toyota Aygo

under body suspension and brake components covered in under seal

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Outer Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Outer Integral body structure is fractured and structural rigidity is significantly reduced sill marked in yellow (6.1.1 (a) (i))

Nearside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Brake performance unable to be tested (1.2.1 (g))

Emissions unable to be completed (8.2.1.2 (d))

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Front Road wheel fixing missing (5.2.1 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Brake pipe leaking on a hydraulic braking system burst on brake test (1.1.11 (b) (ii)) DANGEROUS

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

both sides sills corroded

Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

general underbody corrosion front to rear including sills

Engine bay covers are fitted to the vehicle

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Anti-lock braking system wiring excessively damaged Wire has been excessively damaged be the wheel (1.6 (d))

Nearside Front Headlamp are incorrectly positioned (4.1.4 (a))

Offside Front Axle fractured hub has a crack (5.1.1 (a)) DANGEROUS

Rear Brake pipe corroded, covered in grease or other material BOTH SIDES (1.1.11 (c))

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear rear brake binding (3.7.B.1)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Registration plate lamp not working (1.1.C.1d)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

front brake pads wearing thin

front brake pads wearing thin