2012 Alfa Romeo Mito

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Lower Arm Rear Bush Starting To De-Bond (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Lower Arm Rear Bush Starting To De-Bond (5.3.4 (a) (i))

Brake performance unable to be tested (1.2.1 (g))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Parking brake inoperative on one side Cable Broken At Caliper (1.4.1 (a))

Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Lower Arm Rear Bush Starting To De-Bond (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Lower Arm Rear Bush Starting To De-Bond (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened N/S & O/S Pitted (1.1.14 (a) (ii))

slight oil leak under engine bay

Front Exhaust mounting defective (6.1.2 (a))

Front Windscreen excessively tinted but not adversely affecting driver's view sun strip. (3.2 (b) (i))

Front wipers smear.

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Outer sill damaged but still secure.

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Vehicle structure is deformed but structural rigidity is not significantly reduced Outer Sill Pushed in. (6.1.1 (a) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Perished. (5.1.2 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Vehicle structure is deformed but structural rigidity is not significantly reduced Outer Sill Pushed in. (6.1.1 (a) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn perished. (5.1.2 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive Drive Shaft Seal Leaking (8.4.1 (a) (i))

Rear Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Vehicle structure is deformed but structural rigidity is not significantly reduced Outer Sill Pushed in. (6.1.1 (a) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn Perished. (5.1.2 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Vehicle structure is deformed but structural rigidity is not significantly reduced Outer Sill Pushed in. (6.1.1 (a) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn perished. (5.1.2 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Oil leak, but not excessive Drive Shaft Seal Leaking (8.4.1 (a) (i))

Nearside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair Handbrake (1.2.1 (c))

Oil leak, but not excessive Gearbox (8.4.1 (a) (i))

Headlamp light source and lamp not compatible LED bulbs fitted, full beam (4.1.4 (c))

Nearside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair Handbrake (1.2.1 (c))

Oil leak, but not excessive Gearbox (8.4.1 (a) (i))

Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear exhaust deteriorated

exhaust backbox outer skin corroded

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Rear tyre cracking on outer wall

exhaust backbox outer skin corroded