2006 Suzuki Swift

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Seat belt not functioning as intended (7.1.2 (c))

Brake pipe corroded, covered in grease or other material All rear brake pipes (1.1.11 (c))

Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake pipe corroded, covered in grease or other material All rear brake pipes corroded (1.1.11 (c))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material All rear brake pipes corroded (1.1.11 (c))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Service brake: efficiency below requirements (3.7.B.7)

Exhaust mount fitted incorrectly but supporting system ok

Front Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

OSF wheel has slight buckle on the inner edge

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Vehicle has corrosion underneath

Windscreen chipped

Exhaust mount fitted incorrectly but supporting system ok

Front Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

OSF wheel has slight buckle on the inner edge

Offside Headlamp aim too high (1.8)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Vehicle has corrosion underneath

Windscreen chipped

handbrake has no reserve travel

nearside front tyre close to limit 3mm

offside front tyre inside edge wearing

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front coil spring broken (2.4.C.1a)

Offside Rear Mechanical brake component has restricted free movement (3.5.1k)

Parking brake: efficiency below requirements (3.7.B.7)

nearside front tyre close to limit 3mm

offside front tyre inside edge wearing

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS