2006 Peugeot 107

Coolant leak waterpump is worn ()

Front Position lamp with a multiple light source up to 1/2 not functioning both (4.2.1 (a) (i))

Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement x2 (5.3.4 (a) (i))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement x2 (5.3.4 (a) (i))

Oil leak, but not excessive oil filter (8.4.1 (a) (i))

Rear axle corroding

inner and outer sills corroding

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security all rear chassis box sections and inner sills (6.2.2 (d) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security outer sill and also bent /damaged (6.2.2 (d) (i))

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

corrosion to all rear suspension components but not excessive

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure heavy cracking in the treads (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure heavy cracking in the treads (5.2.3 (d) (ii)) DANGEROUS

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security all rear chassis box sections and inner sills (6.2.2 (d) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security outer sill and also bent /damaged (6.2.2 (d) (i))

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

corrosion to all rear suspension components but not excessive

Nearside Front Brake hose slightly damaged chafed (1.1.12 (b) (i))

Nearside Front Road wheel slightly distorted inner edge (5.2.2 (c) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output outer lens faded (4.1.4 (b))

Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security front to rear inner sill to floor (6.2.2 (d) (i))

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security floor (6.2.2 (d) (i))

Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security front to rear inner sill to floor (6.2.2 (d) (i))

Offside Rear Brake pipe corroded, covered in grease or other material brake hose to cylinder (1.1.11 (c))

corrosion to all front and rear suspension components but not excessive

nearside outer sill bent/damaged/corroded

offside front tyre inner edge worn

Emissions not tested unable due to condition of exhaust system (8.2.1.2 (d))

Front Exhaust has a major leak of exhaust gases manifold area (6.1.2 (a))

Front Exhaust system insecure hanger missing (6.1.2 (a))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill (6.2.2 (d) (i))

Rear Exhaust has a major leak of exhaust gases back box corroded and holed (6.1.2 (a))

Rear Exhaust system insecure clamp missing and sections of exhaust separating (6.1.2 (a))

Brake disc in such a condition that it is seriously weakened both discs inner faces seriously worn/corroded (1.1.14 (a) (ii)) DANGEROUS

Exhaust fumes causing a danger to health of persons on board (6.1.2 (b) (ii)) DANGEROUS

Nearside Front Brake hose slightly damaged chafed (1.1.12 (b) (i))

Nearside Front Road wheel slightly distorted inner edge (5.2.2 (c) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output outer lens faded (4.1.4 (b))

Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security front to rear inner sill to floor (6.2.2 (d) (i))

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security floor (6.2.2 (d) (i))

Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security front to rear inner sill to floor (6.2.2 (d) (i))

Offside Rear Brake pipe corroded, covered in grease or other material brake hose to cylinder (1.1.11 (c))

corrosion to all front and rear suspension components but not excessive

nearside outer sill bent/damaged/corroded

offside front tyre inner edge worn

Front Brake disc worn, pitted or scored, but not seriously weakened both discs inner faces (1.1.14 (a) (ii))

Front Exhaust has a minor leak of exhaust gases manifold/catalytic converter area (6.1.2 (a))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security front to rear floor to inner sill (6.2.2 (d) (i))

Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security outer sill corroded and damaged (6.2.2 (d) (i))

Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security front to rear floor to inner sill (6.2.2 (d) (i))

Offside Rear Brake pipe corroded, covered in grease or other material brake hose to cylinder (1.1.11 (c))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security outer sill (6.2.2 (d) (i))

corrosion to all front and rear suspension components but not excessive

exhaust backbox corroded but not to excess

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened both discs inner faces (1.1.14 (a) (ii))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security front to rear floor to inner sill (6.2.2 (d) (i))

Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security outer sill corroded and damaged (6.2.2 (d) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect and casing slightly damaged and corroded (5.3.2 (b))

Offside Front Tyre worn close to legal limit/worn on edge and inner edge heavily scrubbed and cracking to the outer shoulder (5.2.3 (e))

Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security front to rear floor to inner sill (6.2.2 (d) (i))

Offside Rear Brake pipe corroded, covered in grease or other material brake hose to cylinder (1.1.11 (c))

Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security outer sill (6.2.2 (d) (i))

corrosion to all front and rear suspension components but not excessive

exhaust backbox corroded but not to excess

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside sill damaged

Offside Front Tyre worn close to the legal limit (4.1.E.1)

both front shocker absorbers corroding

engine light on

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases REAR BOX (7.1.2)

Exhaust system not adequately supported MIDDLE BOX (7.1.1)

Nearside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Front Tyre worn close to the legal limit 155-65-14 inner edge (4.1.E.1)

Oil leak

nearside outer sill slightly damaged/dented

Nearside Rear wheel bearing rough when rotated (2.6.1)

Oil leak

nearside outer sill slightly damaged/dented

suspected rear brake cylinders leaking/weeping...slight dampness around lower edges of rear backplates but all brakes operate effectively...advise brake inspection

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)