2008 Suzuki Dr 125 Sm K9

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake binding but not excessively (1.2.1 (f))

Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Throttle operating incorrectly (6.2.7 (a) (i))

Drive chain slightly tight (6.1.7 (k) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Nearside Rear Drive chain excessively loose (6.1.7 (c) (i))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Rear Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Chain guard missing ()

Front Brake binding but not excessively (1.2.1 (f))

Drive chain excessively loose (6.2.1d)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake disc(s) excessively worn (3.2.A1l)

Front wheel bearings have excessive free play (2.3.5b)

Rear Brake disc(s) excessively worn (3.2.A1l)

Rear wheel bearings have excessive free play (2.4.A.2c)

Registration plate delaminated (6.3.1.d)

Steering headbearing has excessive free play (2.2.2)

no main beam tell tale

Front Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Front Roller brake test indicates a binding brake (3.3.A1a)

Fuel cap does not fasten securely by a positive means (7.2.2b)

Fuel cap does not fasten securely maintaining the sealing arrangement (7.2.2b) DANGEROUS

Nearside Drive chain excessively loose (6.2.1d) DANGEROUS

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Nearside Clutch lever shortened. (6.2.1g)

Offside Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Headlamp aim too low (1.6)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear wheel bearings have excessive free play (2.4.A.2c)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)