2008 Ford Focus C-max

Offside Rear Lower inner sill corrosion present unable to inspect due to plastic cover present

exhaust bracket broken not likely to fall off

exhaust heat shield insecure

rear sub frame corrosion present

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Lower inner sill corrosion present unable to inspect due to plastic cover present

Offside Rear Nail in tyre

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

exhaust bracket broken not likely to fall off

exhaust heat shield insecure

rear sub frame corrosion present

engine covers and under trays fitted

exhaust corroded

front tyres heavily cracking and perishing

rear tyres starting to crack and perish

suspension corroded

Gearbox mounting defective

Nearside Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Engine mounting damaged but not to excess (6.1.8 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Gearbox mounting defective

Nearside Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Engine mounting damaged but not to excess (6.1.8 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Inner Drive shaft joint worn, but not excessively (6.1.7 (c) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside headlamp aim just visible

Rear exhaust mounting insecure

Offside Front Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Headlamp aim too low (1.8)

Offside Front Headlamp aim too low (1.8)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Engine top cover and undertray fitted restricting view on inspection