2008 Kia Rio

Front Shock absorbers has a serious fluid leak Both front (5.3.2 (b))

Front Suspension arm ball joint excessively worn Both front (5.3.4 (a) (i))

Registration plate lamp does not illuminate simultaneously with the position lamps Neither number plate light working (4.7.2 (a))

Brake pipe corroded, covered in grease or other material Both front to rear pipes (1.1.11 (c))

Front Coil spring corroded Both front (5.3.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge also excessively worn on edges (5.2.3 (e))

Power steering component has slight seepage from a component (2.1.5 (a))

Rear Coil spring corroded Both rear (5.3.1 (b) (i))

Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced underside of vehicle corroded (6.1.1 (c) (i))

crash damage on rear of vehicle however no sharp edges

fuel tank corroding

unknown liquid around fuel tank and rear axle

Offside Rear lamp damaged with sharp edges

All underbody has been heavily undersealed

Brake disc worn, pitted or scored, but not seriously weakened All (1.1.14 (a) (ii))

Brake pipe corroded, covered in grease or other material All (1.1.11 (c))

Coil spring corroded All (5.3.1 (b) (i))

Front engine covers fitted

Power steering pump has slight seepage (2.1.5 (a))

Nearside Front Suspension arm pin or bush excessively worn Front bush (5.3.4 (a) (i))

Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt + play in ball joint (5.3.4 (b) (ii))

Offside Headlamp levelling device cannot be operated from the driver's seat (4.1.5 (b))

Sub-frame corroded and seriously weakened Numerous holes (5.3.3 (b) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Subframe has numerous holes (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material Both front to rear (1.1.11 (c))

Coil spring corroded All four (5.3.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge Bald inner edge (5.2.3 (e))

Offside Front Outer Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement Front bush (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge 3mm + bald inner edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Power steering component has slight seepage from a component (2.1.5 (a))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

All vehicle underbody has been undersealed

Engine covers and undertrays fitted

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp aim too high (4.1.2 (a))

Offside Headlamp levelling device inoperative (4.1.5 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Power steering component has slight seepage from a component steering rack (2.1.5 (a))

front sub frame corroded but not holed at time of test

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

front sub frame corroded but not holed at time of test

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Power steering component has slight seepage from a component (2.1.5 (a))

Exhaust emits an excessive level of metered smoke (7.4.B.3a)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Nearside Front Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Front Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Front Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Rear Upper Stop lamp has light sources not illuminating, but not more than 50% high level brake light (1.2.1b)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Headlamp aim too low and too far to the left. (1.8)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)