2008 Fiat Doblo Cargo

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Inner Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Upper Shock absorbers has a slightly worn bush (5.3.2 (c))

Front Windscreen damaged but not adversely affecting driver's view stone chip (3.2 (a) (i))

Central Front Exhaust system insecure (6.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Exhaust has a major leak of exhaust gases Back box corroded and holed (6.1.2 (a))

Central Rear Upper Stop lamp(s) not working (4.3.1 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

rear heat shield loose

Nearside Rear Shock absorber has an excessively worn bush (2.7.4)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

rear heat shield loose