2012 Ford S-max

Brake disc worn, pitted or scored, but not seriously weakened all (1.1.14 (a) (ii))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Coil spring corroded all (5.3.1 (b) (i))

Front both and offside rear tyre wearing inner edge of tread

Front inner pads wearing low

Nearside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front wing damaged no sharpe edges to cause injury to another

Nearside Rear Other passenger door catch deteriorated but the door can still be readily opened and closed (6.2.3 (c) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

minor leak exhaust gases under bonnet

Brake disc worn, pitted or scored, but not seriously weakened all (1.1.14 (a) (ii))

Coil spring corroded all (5.3.1 (b) (i))

Nearside Front damaged unlikely to cause injury to another

Nearside Rear Other passenger door catch deteriorated but the door can still be readily opened and closed (6.2.3 (c) (i))

Offside Rear Inner edge of tyre wearing low

Rear Brake pipe corroded, covered in grease or other material plastic coating swelling (1.1.11 (c))

minor leak exhaust gases under bonnet

Nearside Front Headlamp levelling device cannot be operated from the driver's seat (4.1.5 (b))

Offside Rear Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii))

Brake disc worn, pitted or scored, but not seriously weakened all (1.1.14 (a) (ii))

Coil spring corroded all (5.3.1 (b) (i))

Nearside Front damaged unlikely to cause injury to another

Nearside Rear Other passenger door catch deteriorated but the door can still be readily opened and closed (6.2.3 (c) (i))

Offside Rear Inner edge of tyre wearing low

Rear Brake pipe corroded, covered in grease or other material plastic coating swelling (1.1.11 (c))

minor leak exhaust gases under bonnet

Nearside Body damage down n/s of vehicle.

Offside Rear Inner Position lamp with a multiple light source up to 1/2 not functioning Rear inner side light partially inoperative. (4.2.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material Both rear brake pipes swollen in plastic casing. (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material To flexible pipe (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material to flexible pipe (1.1.11 (c))

Nearside Front Tyre worn close to legal limit/worn on edge Tyre Treads - 3.0mm + far inside treads worn (5.2.3 (e))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Front Tyre worn close to legal limit/worn on edge Tyre Treads - 3.0mm + far inside treads worn (5.2.3 (e))

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Inner Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Rear Inner Position lamp not working (4.2.1 (a) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge Tyre Treads - 3.0mm + far inside treads worn (5.2.3 (e))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Nearside Rear Outer Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge Tyre Treads - 3.0mm + far inside treads worn (5.2.3 (e))

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)