1973 Volkswagen Beetle

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Nearside Front Body panel corroded and likely to cause injury wing (6.2.1 (a) (i))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Windscreen washer not working (3.5 (a))

Steering wheel likely to become detached loose (2.2.1 (b) (ii)) DANGEROUS

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))

Nearside Front passenger door cannot be opened from inside the vehicle (6.2.3 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Suspension component mounting prescribed area is corroded but not considered excessive n/s rear bodyshell mount (5.3.6 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Suspension component mounting prescribed area is corroded but not considered excessive n/s rear bodyshell mount (5.3.6 (a) (i))

Tyre worn close to legal limit/worn on edge o/s front outer edge (5.2.3 (e))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Tyre worn close to legal limit/worn on edge o/s front outer edge (5.2.3 (e))

Offside Front Seat belt buckle not functioning as intended (7.1.2 (d))

Seat belt anchorage prescribed area strength or continuity significantly reduced n/s rear inner body (7.1.1 (a) (i))

Offside Rear position lamp(s) not working (1.1.A.3b)

Suspension arm has excessive play in a ball joint n/s front lower (2.4.G.2)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Body has a projection caused by corrosion (6.1.C.1)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Service brake: efficiency below requirements (3.7.B.7)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

front brakes release unevenly (3.7.B.4)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Headlamp not working on main beam (1.7.5a)

Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

body work has some corosion

Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

sill to floors outer sils corroding

spare wheel well coroding

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Seat belt retracting mechanism defective (5.2.5b)

Offside Headlamp aim too high (1.8)

Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Rear Suspension arm corroded and seriously weakened (2.4.G.1)

Offside Stop lamp not working (1.2.1b)

both front inner wings corroding

spare wheel well corroding

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Nearside Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Steering retaining device insecure (2.2.C.1g)