MOT Status
ValidMileage
47,388 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Central Front Upper Brake pipe corroded, covered in grease or other material Runs across lower cab floor (1.1.11 (c))
Offside Front Lower Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Outer Exhaust mounting defective (6.1.2 (a))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Central Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Central Front Upper Brake pipe corroded, covered in grease or other material Runs across lower cab floor (1.1.11 (c))
Offside Front Lower Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Outer Exhaust mounting defective (6.1.2 (a))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface Lens damaged (4.8.1 (a) (i))
Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Inner Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Offside Front Lower Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Rear Outer Body mounting fixing insecure, but overall security not significantly reduced Rear panel slightly damaged but not likely to become detached (6.2.2 (c) (i))
Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Windscreen wiper does not clear the windscreen effectively Both (3.4 (b) (ii))
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Brake load sensing valve inoperative and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS
Nearside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface Lens damaged (4.8.1 (a) (i))
Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Inner Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Offside Front Lower Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Rear Outer Body mounting fixing insecure, but overall security not significantly reduced Rear panel slightly damaged but not likely to become detached (6.2.2 (c) (i))
Rear Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Lower Windscreen damaged but not adversely affecting driver's view Attention required (3.2 (a) (i))
Battery insecure and likely to cause a short circuit (4.13 (a) (ii))
Nearside Front Service brake excessively binding (1.2.1 (f))
Offside Rear Outer Stop lamp(s) adversely affected by the operation of another lamp Removes tail light completely when applied (4.3.3 (b))
Offside Rear Outer Stop lamp(s) not working (4.3.1 (a) (ii))
Windscreen wiper not working Do not park in the correct position when switching off (3.4 (a))
Offside Front Lower Windscreen damaged but not adversely affecting driver's view Attention required (3.2 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Suspension component mounting prescribed area damaged but not considered excessive inner wing (5.3.6 (a) (i))
Offside Brake hose has slight corrosion to ferrule both (1.1.12 (f) (i))
Offside Front Brake pipe corroded, covered in grease or other material both pipes (1.1.11 (c))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive sill/door step (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Brake pipe corroded, covered in grease or other material all pipes coated in under seal (1.1.11 (c))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced next to subframe mounting point (6.1.1 (c) (i))
Windscreen wiper not working (3.4 (a))
Brake pipe corroded, covered in grease or other material all pipes coated in under seal (1.1.11 (c))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced next to subframe mounting point (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Central Front Oil leak, but not excessive (8.4.1 (a) (i))
Central Front Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Nearside Exhaust mounting defective ruber mountings missing (6.1.2 (a))
Offside Front Inner Track rod end ball joint has slight play (2.1.3 (b) (i))
Oil leak ()
Front Direction indicator incorrect colour Both (1.4.A.2f)
Offside Rear Direction indicator incorrect colour (1.4.A.2f)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
parts of vehicle have been undercoated
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
rear brake recording little or no effort (3.7.B.5a)
parts of vehicle have been undercoated
centre /rear exhaust corroded
Battery insecure (1.9.1)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Parking brake lever has no reserve travel (3.1.6b)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Vehicle structure has slight corrosion (6.1.A.1)
centre /rear exhaust corroded
Exhaust has a minor leak of exhaust gases (7.1.2)
both sides front brake pipes slightly corroded
exhaust system in poor condition
Brake cable has wires broken and is significantly weakened (3.5.1b)
Brake load sensing valve linkage seized (3.6.E.3)
Exhaust system not adequately supported (7.1.1)
Exhaust has a minor leak of exhaust gases (7.1.2)
both sides front brake pipes slightly corroded
exhaust system in poor condition
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Headlamp aim too high (1.8)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
freed load sensor arm
travel on handbrake
Nearside front brake binding (3.7.B.1)
Offside Stop lamp not working (1.2.1b)
Offside front brake binding (3.7.B.1)
freed load sensor arm
travel on handbrake
How Reliable is the Peugeot Boxer?
Based on 1,709,897 MOT tests across 147,582 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
YS02 UPZ is a 2002 Peugeot Boxer in White with a 2,800cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 65.5%.
Across all 2002 Peugeot Boxer models, the average MOT pass rate is 71.5% with a typical mileage of 48,147 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot Boxer fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 25,662 recorded failures. If you're considering buying YS02 UPZ, it's worth having these areas checked by a mechanic before committing.
The Peugeot Boxer typically stays on UK roads for around 31 years. At 24 years old, this Peugeot Boxer is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of YS02 UPZ?
You can check the full history of YS02 UPZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was YS02 UPZ registered?
YS02 UPZ is a 2002 Peugeot Boxer, first registered on 18 June 2002.
Is YS02 UPZ safe to buy?
The MOT history for YS02 UPZ shows 29 tests with a 65.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does YS02 UPZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on YS02 UPZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.